Xerox C8 - DocuPrint Color Inkjet Printer User Manual page 349
For xerox docucolor 8000 digital press
Hide thumbs
Also See for C8 - DocuPrint Color Inkjet Printer:
- System administration manual (148 pages) ,
- Manual (51 pages) ,
- Release note (26 pages)
Table of Contents
Advertisement
Default Color Flow
The
is used to emulate various standards used in
CMYK workflow
lithographic printing. These standards represent specific combinations of
paper and ink, as well as popular proofing systems. It is also used to
emulate other printing devices such as offset presses, or other digital
printers. An example of a CMYK workflow job would be printing a test
sample for a survey before moving to an offset press to print millions of
survey forms. In such a case, it is best to emulate the offset before the job
actually goes to offset printing.
Note: RGB colors are not affected by the CMYK workflow.
The Spire CXP8000 color server supports two CMYK emulation methods,
(default) and
Device Link
select
>
>
Tools
Settings
For more information about choosing an emulation method, see Emulations on
page 414.
The
parameter is also used to specify the required
CMYK workflow
rendering intent for CMYK elements. All printers, monitors, and scanners
have a gamut or range of colors that they can output (or view in the case of
a scanner). If a color needs to be output and is outside the gamut of the
output device, it must be mapped or approximated to some other color,
which exists within the gamut.
Rendering Intent enables you to compress out-of-gamut colors into the
color capability of the press you are using. You can set any rendering intent
value for
elements by selecting the required from the
CMYK
list. The default value for CMYK is
intent
In addition, you may also select to emulate the paper tint and adjust the
white point value of the used paper stock. For example, if you want to
simulate pink paper stock while using white paper stock, you may use the
corresponding emulation profile and select the
check box. The result will be that in addition to the job emulation, the
paper tint will be also emulated and will have a pink shade.
. If you would like to use the CSA method,
CSA
and change the emulation method.
Color
Relative Colorimetric
Rendering
.
Emulate source paper tint
335
Advertisement
Table of Contents
