Basic Settings
Image Position
This option enables you to adjust the image positioning on the sheet's
printed page (simplex or duplex).
This function uses the following terminology:
•
the sheet's edge near the printer rear, where printing stops
Rear:
•
the edge of a sheet at which printing begins
Lead:
The page's Lead and Rear edges are determined just after the page is
printed out, before making any change in the page orientation.
To adjust the image positioning in duplex printing, do one of the
following:
•
Select
Same on both sides
(face down image) according to the shift on the sheet's first side (face
up image).
•
Click
Center Image
to shift the image on the sheet's second side
to set the
and
Rear
Lead
values to
.
0
163