Setting Up An Lpr Printer In Windows 2000 And Windows Xp - Xerox C8 - DocuPrint Color Inkjet Printer User Manual

LPR Printing with the Spire CXP8000 Color Server

Setting up an LPR Printer in Windows 2000 and Windows XP

Select
14. Yes (Recommended)
select .
No
Click .
15. Next
In the Setup Information window, click
16.
printer with the Spire CXP8000 color server PPD file.
When prompted to configure the printer, click
17.
Click .
18. Next
In the Printer Configuration window, select
19.
configure the printer now.
Click .
20. Next
The CXP8000 Properties window appears.
Configure the printer according to your specifications, and then click
21.
.
OK
In the Setup Complete window, click
22.
The new LPR printer is now listed with your other printers on the
Windows NT computer, and you are now ready to print to the Spire
CXP8000 color server using the LPR.
The following procedure describes how to configure an LPR printer in
Windows 2000 and Windows XP for printing to the Spire CXP8000 color
server.
The following items must be installed and configured on the Windows
2000 and Windows XP computer before you begin:
TCP/IP protocol
1.
Latest Adobe PostScript Printer Driver, you can install this from the
2.
Spire CXP8000 color server,
can download the latest version free from
support/downloads/main.html.
Spire CXP8000 color server PPD file copied to your client workstation
3.
(the PPD file is located on the Spire CXP8000 color server in the
folder).
D:\utilities\PPD\
if you want to print a test page. Otherwise,
to install the LPR
Install
Yes
when prompted to
Yes
to complete the setup.
Finish
D:\utilties\Utilities\PC utilities,
http://www.adobe.com/
97
.
or you