Xerox C8 - DocuPrint Color Inkjet Printer User Manual page 333

Calibration
After each scan, wait for the check mark to appear next to the
15.
appropriate icon and follow the instructions as listed.
Note: Ensure that the separation columns on the Image Density Chart are
scanned in the order they appear in the icons:
Cyan>Magenta>Yellow>Black.
When all of the separation columns have been successfully measured,
a check mark appears next to all icons.
If in Step 1 of the wizard, you selected
16.
list, you are now required to sweep the
method
Follow the same scan sequence. Begin each chart with the cyan
column.
Note: After the LW Density black separation is scanned and the beep is
heard, it can take several seconds until the check mark appears in the box.
When all of the Text/Line Art separation columns have been
successfully measured, a check mark appears next to all icons.
Note: If at any stage the scanning has not been completed properly, click
Reset and scan again.
from the
Auto Select screening
Text/Line Art Chart
319
.