Device Cannot Be Inserted; Nothing Happens When A Device Is Inserted; Partial Photo Prints - Lexmark 22W0000 - P 350 Color Inkjet Printer User Manual

1
Install a new print cartridge if necessary. For more information, see "Installing the print cartridge" on page 47.
To order supplies, see "Ordering supplies" on page 48.
2
Press to continue.

Device cannot be inserted

Make sure that the type of memory card, flash drive, PictBridge camera, or Bluetooth adapter you are using can be
used in the printer. For more information, see "Connecting photo storage devices" on page 0 .

Nothing happens when a device is inserted

S 1
OLUTION
Remove and reinsert the memory card, flash drive, PictBridge-enabled camera, or Bluetooth adapter quickly.
S 2
OLUTION
For more information, see "Connecting photo storage devices" on page 0 .
S 3
OLUTION
Check that there is no obvious damage to the memory card, flash drive, PictBridge-enabled camera, or Bluetooth
adapter.
S 4
OLUTION
Insert only one device at a time.
S 5
OLUTION
Check the cable connections.
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the

Partial photo prints

The memory card, flash drive, or Pictbridge-enabled camera you inserted is empty or contains files that cannot be
read by the printer.
S 1
OLUTION
Use another memory card, flash drive, or Pictbridge-enabled camera.
USB symbol.
Troubleshooting
53