Rear.panel - DigiTech VOCALIST LIVE PRO Manual

Rear.Panel

..1..AC.Power.Jack:.Standard IEC power cord input, to supply the Mains AC input.. This AC input jack also contains
the fuse that the unit is currently using in addition to a spare fuse.
2..USB.Port:.This port is USB 1.1 full-speed (12Mbits/second) and carries MIDI control information to the Vocalist®
Live Pro from a personal computer. The Vocalist Live Pro uses the USB port to interface to a computer running
the Vocalist Live Pro Utilities software used to provide preset backup and restore functionality with the Preset
Librarian. The Vocalist Live Pro Utilities software and documentation can be downloaded from www.digitech.com.
..3..Footswitch:.This TRS 1/4" jack connects the optional DigiTech® FS3X or GNXFC 3-button footswitch to allow
hands-free control of many of the Vocalist Live Pro's functions. Each of the 3 buttons on the optional footswitch
can be mapped to one of the following functions: Preset Up, Preset Down, Tuner, Tap Tempo, Harmony Toggle,
Harmony Momentary, Lead FX, Toggle, Lead FX Momentary, Reverb/Delay Toggle, Reverb/Delay Momentary,
Harmony/Lead FX Toggle, Harmony/Lead FX Momentary, Harmony/Reverb/Delay Toggle, Harmony/Reverb/Delay
Momentary, Lead FX/Reverb/Delay Toggle, Lead FX/Reverb/Delay Momentary, Harmony/Lead FX/Reverb/Delay
Toggle and Harmony/Lead FX/Reverb/Delay Momentary.
..4..Expression.Pedal:.This input accepts a TS or TRS expression pedal for controlling real-time parameters. Many
elements on the Vocalist Live Pro can be controlled in real-time using the expression pedal.
5..S/PDIF.Out: The S/PDIF output echoes the MAIN outputs signal in digital S/PDIF format.
6..MIDI.In: This 5-pin female DIN MIDI In port is used to receive control (CC, MIDI Clock, SysEx Program Change
and Pitch Bend) and note information from an external device.
7..MIDI.Thru: This port echoes data received on the MIDI In port and is typically used for daisy-chaining MIDI
devices together.
8..Main.Out.Left.and.Right: These balanced XLR outputs carry a mix of the lead and harmony vocals and effects at
line levels in mono or stereo.
9..Outputs.Ground.Lift: This button activates the Ground Lift for the Main Out, Aux Out and Mic Pass Thru
outputs. This switch lifts Pin 1 of the XLR Main Outputs and Mic Pass Thru Jack and the shield of the TRS ¼" Aux
outputs from all ground references and may help break troublesome ground loops that cause hum in the system,
especially when both XLR and 1/4" outputs are used together.
10..Aux.Out.Left.and.Right: These female balanced / unbalanced TRS jacks output the processed mix of the lead and
harmony vocals and effects at line levels in mono or stereo.
11..Line.In: This balanced female 1/4" input accepts the line level vocal audio when selected with the Vocal Input Line
Button on the front panel. Note that the front Mic and rear Line Inputs cannot be active simultaneously.
12..Mic.Pass.Thru: This output provides the dry, unprocessed vocal signal obtained at the front panel Vocal Input.
VL.Pro.Owner's.Manual
Rear.Panel
6