DigiTech VOCALIST LIVE PRO Manual page 35

Edit Pre-Effects Table (Continued)
Noise
Gate
Noise
Gate
Threshold
Compressor
Type
Compressor
Ratio
Threshold
Attack
Release
EQ
Bass
Mid Gain
EQ
Mid Freq
Treble
Noise Gate is turned Off or On. The Noise Gate is useful for muting the
signal when it falls below a specified threshold.
The Noise Gate engages when the Lead Voice input falls below the speci-
fied threshold. Range: –80dB to –20dB
Compressor is turned Off or On
Abruptly reduces gain when the input level rises
Hard Knee
above the threshold.
Gently reduces gain when the input level rises
Soft Knee
above the threshold.
Very gently reduces gain when the input level
Softer Knee
rises above the threshold.
The ratio of the change in input level to the change in output level mea-
sured in decibels (dB). For example, a 2:1 ratio means that for every 2 dB
the input level changes, the output level changes 1 dB.
Using a high compression ratio increases susceptibility to
Warning:
feedback due to the higher gain used.
Range: 1.0:1 to 5.0:1
Defines the input level of the compressor knee. Range: -40dB to 0dB
Controls how quickly the compressor begins its effect on the signal.
Range: 1ms to 99ms
Controls how quickly the compressor ends its effect on the signal.
Range: 10ms to 990ms
Equalizer is turned Off or On.
Reduces or increases the volume of bass frequencies.
Range: –12dB to +12dB
Reduces or increases the volume of midrange frequencies. Select this
frequency with Mid Frequency. Range: –12dB to +12dB
Selects the center frequency that is reduced or increased with
Mid Gain. Range: 80Hz to 7650Hz
Reduces or increases the volume of treble frequencies.
Range: –12 to +12dB
The.Edit.Preset.Menu
29
VL.Pro.Owner's.Manual