DigiTech RPX400 User Manual page 35

Modeling guitar processor and usb audio interface
Hide thumbs Also See for RPX400:
Table of Contents

Advertisement

Mic USB Source Mapping
The mic signal, as can be seen in the previous Mic Signal Routing diagram, has two paths in which it can
travel up the USB port to the computer. Path E taps the mic signal off right at the mic input and sends
unprocessed signal up to the USB port. Path C taps the signal at the output of the RPx400 and can
include any effects processing that may be used. Below is a matrix to show where the signal is tapped
based on how the Mic, USB 1-2 Source, and USB 3-4 Source settings are configured.
Routing of Mic Inputs to USB
Mic
micoff
micdry
micRVB
MICFX
Line Signal Routing
The line signals, like the mic signal, can be routed in different ways through the RPx400.
the line inputs from being being heard but dry line signal can still be recorded.
and right line signals around the RPx400's effects processing and mixes them in at the left and right out-
linrvb
puts respectively.
linefx
sums the left and right line input signals together and then routes this signal through all of the
RPx400's effects.
F
USB Dry
Send Path
Line Left
Line Right
+
= Speaker Compensation Module
SC
Line USB Source Mapping
The line input signals, as can be seen in the previous Line Signal Routing diagram, has two paths in which
they can travel up the USB port to the computer. Path A taps the line input signals off right at the line
input and sends unprocessed signal up to the USB port. Path B taps these signals at the output of the
RPx400 and can include any effects processing that may be used. Below is a matrix to show where the
signal is tapped based on how the Line, USB 1-2 Source, and USB 3-4 Source settings are
configured.
Routing of Line Inputs to USB
Line
LINoff
LINdry
LINRVB
LINeFX
The RPx400 and Recording
USB 1-2 Source
E E E E E •
• E •
E E E E E •
• E •
C C C E E •
• E •
C C C E E •
• E •
routes the line signals only through the RPx400 Delay and Reverb modules.
linefx
Amp/
Pickup
Noise
Wah
Comp
Cabinet
Sim
Gate
EQ
USB 1-2 Source
F F F F
F
F F F F
F
C C C C • C •
C C C C • C •
Mic
micoff
micdry
micRVB
MICFX
C
USB Send
Path
linrvb
+
SC
Mod/
SC
Delay
Reverb
Chorus
+
SC
SC
SC
Line
LINoff
LINdry
LINRVB
LINeFX
USB 3-4 Source
• E •
• E •
• E •
• E •
• E •
• E •
• E •
• E •
linoff
lindry
routes the left
D
USB Playback
Return Path
lindry
XLR Left Output
+
XLR Right Output
+
1/4" Left Output
1/4" Right Output
(1/4" USB Playback
disabled in Split Modes)
USB 3-4 Source
F
F
• C •
• C •
disables
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents