Reverb - DigiTech S100 User Manual

Section -3 Effects and Parameters

Reverb

Effect Name
Stage - St
Room - ro
Hall - HA
Plate - PL
Chamber - Ch
Cathedral - Ca
Arena - Ar
Gated - Ga
Reverse - rE
Reverb is the perfect effect for adding dimension to any recording or live application where you need to emulate the size and
shapes of different types of rooms. The following explains the parameters that are available in the Reverb effects.
Note: When Reverb effects are used in Effect Configuration 1 (which is a Whole effect module) larger and more
dense sounding Reverbs can be attained.
Pre Delay
Decay
Damping
Diffusion
Level
16
Parameter 1 Parameter 2
Decay - dC
Predelay - Pd
Decay - dC
Predelay - Pd
Decay - dC
Predelay - Pd
Predelay - Pd Decay - dC
Predelay - Pd Decay - dC
Predelay - Pd Decay - dC
Decay - dC
Predelay - Pd
Predelay - Pd Decay - dC
Predelay - Pd Decay - dC
This parameter controls the length of time before the reverb reflections
are heard. Range is from 0 to 99 ms.
This parameter controls the decay length (reverb time) of the reverbera-
tion. Range is from 1 to 10.
This parameter controls the high frequency decay of the reverb effect
and ranges from 1 to 10.
This parameter controls the reverb smoothness and ranges from 1 to 10.
This parameter allows you to set the overall level of the selected effect.
Range is from 0 to 99.
S-100
Parameter 3 Parameter 4
Level - L
Damping - Da
Level - L
Damping - Da
Level - L
Damping - DA
Damping - da Level - L
Damping - da Level - L
Damping - da Level - L
Level - L
Damping - dA
Diffusion - di Level - L
Diffusion - di
Level - L
User Guide