DigiTech S100 User Manual page 17

S-100
Delay Coarse
Delay Fine
Delay Time
Feedback
Repeat
Level
User Guide
Section -3 Effects and Parameters
Maximum Delay times
D-1 (Half=1000 milliseconds and Whole=2000 milliseconds)
D-2 (Half=700 milliseconds and Whole=1000 milliseconds)
D-3 (Half=1000 milliseconds and Whole=2000 milliseconds)
This parameter controls the length of the Delay Coarse time Range is
from . 1 (which equals 100 milliseconds) to 2 . 0 (which equals 2
seconds).
This parameter controls the length of the Delay Fine time. Range is from
0 to 99 milliseconds.
This parameter controls the length of the Delay Time that is offered in
the Karaoke. Delay Time settings are 1-5.
This parameter controls the amount of delay repeats in the delay effect.
Range is from 0 to 99% and repeat-hold (rh).
This parameter controls the amount of delay repeats in the D-4 Karaoke
effect. Range is from 1 to 10.
This parameter allows you to set the overall level of the selected effect.
Range is from 0 to 99.
15