Section Five - Appendix; Specifications - DigiTech RP355_E - REV 18-6412V-D Owner's Manual

Section Five - Appendix

Specifications

General Specifications
A/D/A Converter: 24-bit high performance audio
Sampling Frequency: 44.1 kHz
DSP Section: AudioDNA2™ DSP Processor
Simultaneous Effects: 11
Preset Memory: 70 User Presets (1-70) / 70 Factory Presets (F1-F70)
Phrase Looper: 20 seconds of record time
Drum Machine: 60 Patterns
Dimensions: 17.5˝ Length x 8.75˝ Width x 2.5˝ Height
Unit Weight: 6.2 lbs.
Analog Input Connections:
Guitar Input: 1/4˝ Unbalanced (TS)
Input Impedance: 500k Ohms
Aux Input: 1/8˝ Stereo (TRS)
Analog Output Connections:
1/4˝ Outputs
Left/Right Outputs: 1/4˝ Impedance Unbalanced
Left/Right Output Impedance: 500 Ohms per side
Maximum Output: +10 dBu
XLR Outputs
Left/Right Outputs: Impedance Balanced
Left/Right Output Impedance: 1 kohm per side
Maximum Output: +16 dBu
Headphones: 1/8˝ Stereo (TRS) – 13.6mW per channel @ 50 Ohms
Digital Connections:
Universal Serial Bus (USB): Type B, supports USB1.1 Full Speed (12 Mbps Bandwidth USB 2.0 compatible)
RP355 USB Recording Specifications:
Sample Rate: 44.1 kHz
Bit depth: supports 16-bit or 24-bit (depends on setup in Recording Software)
Power Requirements:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B-120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B -100
Europe: 230 VAC, 50 Hz Adapter: PS0913B -230
UK: 240 VAC, 50 Hz Adapter: PS0913B -240
Windows Software Requirements
®
Vista Home/Premium, XP Home/Professional (SP2 installed, .NET 2.0 installed*)
Pentium /Athlon™ 1.4GHz or later 512MB RAM (1GB RAM recommended)
®
180MB hard disk space for application
DVD-ROM drive
USB Port
Internet connection required for Cubase activation
*.NET 2.0 will be installed during installation of X-Edit software if required on XP systems
Mac Software Requirements
®
OS 10.4.x or later
PowerPC G4/G5 1GHz or later
512MB RAM (1GB RAM recommended)
180MB hard disk space for application
DVD-ROM drive
USB Port
Internet connection required for Cubase activation
30