Section Three - Models And Parameters; About The Models; Model Definitions; Pickup - DigiTech RP355_E - REV 18-6412V-D Owner's Manual

Modeling guitar processor
Table of Contents

Advertisement

Section Three - Models and Parameters

About the Models

The RP355 can be thought of as several different "virtual" amplifiers and individual, high-tech
stompboxes in a single programmable package. With stompboxes, the order in which they are
connected affects the overall sound. The RP355 has placed the Amp and Effect models in an
order for optimum results. The following diagram shows the order in which they are connected.

Pickup

Simulator

Model Definitions

Each Amp and Effect model within the RP355 can be programmed to suit your personal taste
and application. Understanding how these components alter the sound, and how each parame-
ter alters the effect, will help you achieve the sound you are looking for. The following overview
of the RP355's effects outlines what each effect and parameter does.
Pickup
The Pickup Simulator provides the thick tone of a humbucker pickup to a guitar with single
coil pickups, or the bright, edgy sound of a single coil pickup to a guitar with a humbucker. This
gives you the best of both worlds without having to change guitars during a performance.
Pickup Model - Knob 1 selects the Pickup model to be simulated. Values include:
SC>Hb (gives a single coil pickup the warm tone of a humbucker), and Hb>SC (gives a
humbucker the unique sound of a single coil). Press this knob to turn Pickup modeling on
and off.
USB/RP Mix (When connected to a computer via USB) - Knob 2 adjusts the out-
put mix between the RP355 and playback from the computer. Ranges from uSB 0 - uSB
rP - rP 0.
USB Level (When connected to computer via USB) - Knob 3 adjusts the RP355's
recording level sent to the computer. Ranges from -12 to +24.
Preset Level - Knob 6 adjusts the preset's level. Ranges from 0 to 99.

Wah

Wah is an effect controlled by an Expression Pedal making the guitar sound as if it's saying
"Wah."
Wah Model - Knob 1 selects the Wah model. Values include: FuLrnG (DigiTech
Range Wah sweeps the entire spectrum of audible frequencies), CrYwah (Cry Wah is a
traditional sounding Wah), and clyde(based on a Vox
knob to turn Wah models on and off.
Wah Minimum - Knob 2 adjusts the Wah Pedal Minimum. Ranges from 0 (toe up) to
99 (toe down).
Wah Maximum - Knob 3 adjusts the Wah Pedal Maximum. Ranges from 0 (toe up) to
99 (toe down).
Wah Level - Knob 6 adjusts the Wah Level. Ranges from 0dB to +12dB.
Wah
Compressor
Volume
Noise Gate
Pedal Pre
Whammy/
Distortion
Chorus/FX
(Pre)
Chorus/FX
Delay
(Post)
Clyde McCoy
®
Amp
Cabinet
EQ
Modeling
Model
Volume
Reverb
Pedal Post
®
Wah). Press this
TM
Full
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp355

Table of Contents