Calibrating The Expression Pedal - DigiTech JIMI HENDRIX EXPERIENCE Manual

Calibrating the Expression Pedal

1. Select Model 1 using the
2. Press and hold the
INDICATOR LED
3.While the
INDICATOR LED
EXPRESSION PEDAL
4. Select Model 2 using the
flashes yellow.
5.While the
INDICATOR LED
EXPRESSION PEDAL
6. Select Model 3 using the
should flash green three times and then turn off, indicating the
EXPRESSION PEDAL
Note: If the calibration procedure fails, the INDICATOR LED will flash red
instead of green during step 6 and the unit will not return to normal operation
until the EXPRESSION PEDAL has been properly calibrated. Select Model 1
using the MODEL knob at this time and repeat steps 3-6 until expression pedal
calibration is successful.
knob.
MODEL
HEEL SWITCH
flashes green.
is flashing green, rock the
all the way forward (toe down).
knob. The
MODEL
is flashing yellow, rock the
all the way back (toe up).
knob. The
MODEL
has been successfully calibrated.
for five seconds.The
INDICATOR LED
INDICATOR LED