Dynacord DSA SERIE DUAL-CHANNEL Brochure page 26

DSP 600
INPUTS
In the inputs, as well as the routing functions,
extensive editing possibilities are available:
Input Level Signal Generator
•
pilot-tone detection
•
test signal generator
(pink noise, white noise, sine wave)
•
VU meter for input signal
•
10-band parametric equalizer
•
31-band graphic equalizer
•
delay
•
input pad switch (-6 dB)
OUTPUTS
In each of the outputs there are two control areas.
ARRAY CONTROL
PEQ DELAY
ARRAY CONTROL (PER CHANNEL)
•
5-band parametric equalizer
•
array delay
SPEAKER PROCESSING (PER CHANNEL)
•
6-band parametric equalizer
•
cross-over (high-pass/low-pass filters),
Bessel, Butterworth, Linkwitz-Riley
•
FIR-filter with 512 taps (high-pass,
low-pass, band-pass, speaker-specific)
A unique and particularly remarkable feature is
the multi-stage delay concept featuring dedicated
delays for different applications in complex audio
systems: the INPUT DELAY (1,000 ms) for synchronization
of the main PA to delay systems, the ARRAY DELAY
(100ms) for the synchronization of individual loud-
speaker boxes within a cluster or stack, the X-OVER
DELAY (10 ms) for evening out the run-times of
individual loudspeaker components within a box,
26
PEQ
SPEAKER PROCESSING
PEQ X-OVER FIR
FILTER
GEQ
DELAY POLARITY LEVEL
•
delay
•
polarity
•
look-ahead peak anticipation limiter
•
thermal limiter for loudspeaker protection
•
level & mute
•
pilot tone generator
•
VU metering
•
output assignment display LEDs; Sub, Low, Mid, High
•
gain reduction meters
and finally the CHANNEL DELAY (1,000 ms) for
evening out the run-times of e.g. subs and tops.
Its clear structure, its wealth of possibilities, its
exceptional user-friendliness, its outstanding audio
performance – particularly in combination with the
FIR-TUNE settings for all applicable DYNACORD
loudspeaker components – make the DSP 600 the
ideal manager even for complex, modern, high-quality
audio systems.
Delay
LIMITERS OUTPUT
LEVEL