Dynacord DSA SERIE DUAL-CHANNEL Brochure page 21

118 dB dynamic range – for superior
audio performance without spurious
noise.
100 ohms balanced output driver
– lossless signal distribution to
several parallel inputs, even over
longer cable runs. Output relays –
power-on delay and quick discon-
nection for effective suppression
of power-on/off noise.
DI-1
The DI-1 is an 8-channel digital
input module for use in a DYNACORD
P 64 system.
Digital audio signals in AES/EBU or
S/PDIF formats are connected via
screw-lockable Euro block connec-
tors. Additional Toslink inputs al-
low for the optical transmission of
digital audio signals. All inputs of
the DI-1 module employ high-quali-
ty sample rate converters. Internal
DI-1
signal processing is performed in
48-bit word length.
128 dB dynamic range – for supe-
rior audio performance without
spurious noise. Sample rates of 32
- 192 kHz – connection of basically
any digital audio signal source.
Sample rate converter per input
– allows the connection of digital
audio signal sources even with
different sample rates.
DO-1
The DO-1 is an 8-channel digital out-
put module for use in a DYNACORD
P 64 system.
Digital audio signals (48 kHz samp-
le rate) are output via screw-locka-
ble Euro block connectors. Internal
signal processing is performed
in 48-bit word length. 144 dB
dynamic range – for superior audio
performance.
DO-1
CM-1
CobraNet is a network technology
for multi-channel transmission of
digital audio data.
The CM-1 is a compact interface
module for connection to a Cobra-
Net network, allowing the simul-
taneous transmission of up to 32
digital audio input signals and 32
digital audio output signals.
• 100BASE-TX Ethernet interface
• Secondary 100BASE-TX
• Ethernet interface
• Four serial output ports
• Four serial input ports
• Status LEDs
I / 0 C
ARDS
CM-1
21