Gearbox Leaking
Driveline Integral Shields
Rattling or Not Turning Freely
A60B/A72B 02/07
©2007 Alamo Group Inc.
OPERATION
Damaged Oil Seal.
No Oil Seal.
Oil too light.
Bent Shaft.
Oil Seal Race rough.
Oil Seal installed wrong.
Oil Seal not sealing in the housing.
Bearings loose.
Vent Plug stopped up.
Oil level too high.
Gasket damaged.
Bolts loose.
Install Shields deformed.
Nylon Bearing worn.
Operation Section 4-42
Replace Seal.
Install Oil Seal.
Use NLGI-000 Grease, or
Mobilux EP023, or Gulf EP023, or
Sun 740-A EP Grease.
Replace Oil Seal and Shaft.
Replace Shaft or repair Race.
Replace Seal.
Replace Seal or use a sealant on O.D.
of Seal.
Adjust Bearings.
Open Vent Plug.
Drain oil to proper level.
Replace Gasket.
Tighten Bolts.
Replace Shield.
Replace Nylon Bearing.