Setting Up Nav Lines - Furuno FA Manual

Erasing all nav lines
1. Roll the trackball to choose the MENU box and then push the left button.
2. Roll the wheel to choose 5 PLOTTER and then push the wheel or the left
button.
3. Roll the wheel to choose 8 [DATA ERASE] and then push the wheel or the
left button.
4. Roll the wheel to choose 6 NAV LINE ALL ERASE.
5. Push the wheel or the left button to erase all nav lines and their data.
6. Push the right button three times to close the menu.
5.13.5

Setting up nav lines

Nav lines can be set up as follows:
1. Roll the trackball to choose the MENU box and then push the left button.
2. Roll the wheel to choose 8 [NAV LINE•WPT] and then push the wheel or the
left button.
3. Roll the wheel to choose 2 NAV LINE DATA and then push the wheel or the
left button.
[DATA ERASE]
1 BACK
2 OWN TRACK
30%/50%/80%/ALL
3 TARGET TRACK*
30%/50%/80%/ALL
4 MARK ALL ERASE
5 WPT ALL ERASE
6 NAV LINE ALL ERASE
DATA ERASE menu
[NAV LINE•WPT (1/2)]
1 BACK
2 NAV LINE DATA
OFF/EXT DATA/
INTERNAL DATA/
WPT MARK
3 NAV LINE SELECT
00
4 ARRIVAL WPT ALARM
OFF/ON 0.00NM
5 NAV LINE WIDTH
0.00NM
6 [WPT SET]
7 [WPT LIST]
8 [NAV LINE SET]
9 [NAV LINE LIST]
0 NEXT
NAV LINE•WPT menu (1/2)
5. VIDEO PLOTTER OPERATION
*: Not available
on IMO radar
.
5-31