Digital Interface; Data Sentences - Furuno FA Manual

APPENDIX

2. Digital Interface

Input sentences (RP Board, J4)
BWC*, BWR*, DBS, DBT, DPT, DTM, GGA, GLC, GLL, HDT, MTW, MWV, RMA, RMB,
RMC, RTE VBW, VDR, VHW, VTG, VWR, VWT, WPL, ZDA, !AIVDM, !AIVDO, $AIALR
Output sentences
OSD, TLL*, TTM, RSD
*: Not available on IMO radar
Data reception
Data is received in serial asynchronous form in accordance with the standard referenced in
IEC 61162-2.
The following parameters are used:
Baud rate: 38,400 bps: HDT, !AIVDM, !AIVDO and $AIALR. All other sentences: 4800 bps
Data bits: 8 (D7 = 0), Parity: none, Stop bits: 1

Data sentences

Data used is shown in bold italics.
Input sentences
BWC - Bearing and distance to waypoint
Checksum
Mode indicator
Waypoint ID
Waypoint longitude, E/W
Waypoint latitude, N/S
A = Autonomous
D = Differential
AP-8