CYBEX AUTOVIEW COMMANDER Installer/User Manual page 26

AutoView Commander Installer/User Guide
Setting Up Additional Users
1. Press the Control key twice or type Alt-M to access the Command Menu.
2. Select 'Administrator Functions' from the Command Menu.
3. Select 'Setup User 1' from the Administrator Menu.
4. Choose the 'Name' sub-menu and enter the name for this user.
5. Choose the 'Password' sub-menu and enter the password and confirm
6. Choose the 'Access' sub-menu. Here, you will see a listing of all attached
7. Choose the 'Logout Time' sub-menu. Enter a value in minutes for this
8. Press Enter to accept your selections and repeat steps 3-8 for each
it for this user. (Passwords are not case sensitive.)
servers in the channel list. For each server, choose a level of access for
this user by selecting one of the function keys listed on the screen: F5 for
no access, F6 for video only or F7 for video and keyboard/mouse
capability. The default is set for full access. All changes go into effect as
soon as they are made. Press Enter when you have completed your
configuration.
user's logout time. A value of 0 keeps the user logged on continuously;
60 is the maximum setting. The default is set for 5 minutes.
remaining user.
22