Basic Channel Maintenance - CYBEX AUTOVIEW COMMANDER Installer/User Manual

AutoView Commander Installer/User Guide
Basic Channel
Maintenance
The Channel Maintenance Menu is accessed from the Administrator
Command Menu, and is available if you are operating in non-secure mode
or if you are the system administrator. Here you can add, delete or alter
individual channels.
Adding New Channels (base unit only)
1. Select 'Add channel' from the Channel Maintenance Menu. Type in a
2. Type in the channel letter for the PC you are naming and press Enter.
3. When prompted for another cascade level, type N and press Enter.
Press Esc at any point to exit this operation without adding the channel.
Adding New Channels (with a cascaded unit)
1. Select 'Add channel' from the Channel Maintenance Menu. Type in a
2. Type in the AutoView channel letter that corresponds to the port that
new channel name, up to 14 characters long, and press Enter.
new channel name, up to 14 characters long, and press Enter.
the second cascaded AutoView unit is attached to and press Enter.
Program Manager
?
Cybex Control Panel
Configure Channel
Add Channel
Delete Channel
Change Channel Name
Change ChannelAddress
Dwell Time For ID window
Options For ID window
Alpha Scan Dwell Time
Games
ENTER-accept ESC-previous
THE CHANNEL MAINTENANCE WINDOW
16