Chapter 3 - Basic Operations; Overview - CYBEX AUTOVIEW COMMANDER Installer/User Manual

3
Basic Operations

Overview

Your AutoView may be operated in a non-secure (no password required)
or secure (password required) mode. All units ship defaulted to the non-
secure mode. For information on implementing password security see the
"Administrator Functions" section of chapter 4.
PCs may be powered up one at a time or all at once. No operator
intervention is required during booting. As the system stabilizes, the
green LEDs over each channel will illuminate, indicating that the attached
computer is powered on. The amber LED will illuminate at the active
computer. A PC may now be selected via the on-screen display menu or,
if you are in non-secure mode, channel push-buttons, the Scan button or
keyboard hot-key sequence.
The Scan push-button has two LEDs over it. Press the button momentarily
to switch to the next computer in sequence. The amber LED will illuminate
briefly during the channel switch. Press and hold the button for 1 second
to initiate channel scanning. The green LED will illuminate while you are
in scan mode.
There are two status LEDs. The red LED illuminates if an internal failure
occurs. The green LED will blink for several seconds during power up
while the system performs a self-diagnostic. After initialization, the green
LED remains illuminated during normal operation and blinks only when
you are in Command Mode.
9