Change Tone Of The Color For The Picture To Be Taken (Film Mode) - Panasonic Lumix DMC-G1 Operating Instructions Manual

[REC] mode:
Change tone of the color for the picture to be
taken
(Film mode)
[You can only select [STANDARD] and [STANDARD] (
[ ] and [ ] mode.]
Every type of film for film cameras has its own color tone and contrast characteristics. In
film mode, you can select the color tone of the pictures from 9 types in the same way as
you would select different films for film cameras.
Select different settings in film mode to match the recording situation and your picture of
the recording.
Press [FILM MODE].
A [FILM MODE] button
Press 2/1 to select an item.
•
You can also use the front dial to select.
•
When you press [DISPLAY] on the screen shown right,
explanations about each film mode are displayed. (When you
press [DISPLAY] again, the screen returns to the previous
screen.)
Press [MENU/SET] to set.
• You can also press the shutter button halfway to set.
Item
[STANDARD] (COLOR)
[DYNAMIC] (COLOR)
[NATURE] (COLOR)
[SMOOTH] (COLOR)
[NOSTALGIC] (COLOR)
[VIBRANT] (COLOR)
[STANDARD] (
[DYNAMIC] (
[SMOOTH] ( )
[MY FILM 1]/[MY FILM 2]
[MULTI FILM]
This is the standard setting.
The saturation and contrast of the stored colors are
increased.
Brighter red, green and blue. Enhanced beauty of nature.
The contrast is lowered for smoother and clearer color.
Lower saturation and contrast. Reflecting passage of time.
Higher saturation and contrast than dynamic.
This is the standard setting.
)
The contrast is increased.
)
Smooths the picture without losing the skin texture.
The saved setting is used.
It will take pictures changing the type of film in accordance
with the setting every time the shutter button is pressed. (Up
to 3 pictures)
Advanced (Recording pictures)
) in [ ], [¿], [
Effect
], [ ], [ ],
81
VQT1U32