Advanced (Recording pictures)
Note
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
•
Refer to P60 for the flash range.
•
Depending on the brightness and how fast the subject is moving, jitter may not be avoided even
if [
] is selected.
•
Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
•
The setting is fixed to [
–
In [BABY1]/[BABY2] and [PET] in scene mode
–
In [INDOOR PORTRAIT], [NORMAL SPORTS], [OUTDOOR SPORTS] and [INDOOR
SPORTS] in advanced scene mode
•
Program shift cannot be activated when the ISO sensitivity is set to [
•
You cannot select [
cannot select [AUTO] in manual exposure mode.
•
To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE RED.] in
[FILM MODE] towards [_] or setting the items except [NOISE RED.] towards [`] to take
pictures. (P82)
80
VQT1U32
] in the following cases.
] in shutter-priority AE mode and manual exposure mode. Also, you
].