Apple Computer, Inc. All other brand and product names are trademarks or registered trademarks of their respective holders. IOGEAR® makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational purposes only and is subject to change without notice.
1 - Power Adapter 1 - Power cable 1 - Quick Start Guide ® 1 - IOGEAR Installation CD with Electronic Manual 1 - Warranty / Registration Card If any of the items are missing or damaged, please contact your dealer immediately.
Overview The TRI-Select ION™ Drive is yet another innovative FireWire ® 400 and Hi-Speed USB 2.0 solution developed by IOGEAR ® . It offers complete Hi-Speed storage and backup solutions at the fraction of the cost of other external Hard Drives.
Features • Transfer or backup pictures, music, and data at speeds up to 480 Mbps – Transfer 1 GB in under 30 seconds • 3-Button Backup Solution that automates backups with Dantz Retrospect Backup software • Ideal for backup, storage expansion, file sharing, software installation, and data management ®...
Requirements To access FireWire ® or USB 2.0 speeds, the computer system must be FireWire ® and/or Hi-Speed USB 2.0 enabled. The ® ® Tri-Select ION™ Drive will work at FireWire 400 and/or USB 1.1 speeds with FireWire enabled and USB 2.0 and/or USB 1.1 enabled computers.
USB 1.1 devices. With the increase in speed, USB 2.0 will offer increased functionality, allowing more devices to share the increased bandwidth. With the increase in demand for FireWire ® and USB 2.0 products, IOGEAR ® decided to provide its customers with a total ®...
A glossary has been added at the end of the manual so you may look up unfamiliar terms. A few things should be mentioned before explaining the installation procedure: ® All IOGEAR ION™ Drives are tested prior to shipment to ensure product quality. ® The connectors on a FireWire and Hi-Speed USB 2.0 cable are designed in such a way as to prevent plugging the cable in...
16. ATTENTION: This section only applies to you if you purchased the Enclosure only model (GHE335C). If the product you purchased already has a hard drive inside skip to page 16. If you have any questions please refer to page 35 to call our TOLL FREE Tech Support line.
Drive Installation (Enclosure Only) Step 3. Remove the two thumb screws on the left side of Step 4. Slide the hard drive braket in an upward direction the hard drive bracket. towards the top of the enclosure to free the drive bracket. Lift the drive bracket out of the enclosure.
If you have Windows 98SE/ME the drive must be PRE-FORMATTED, meaning the drive has already been formatted for use as a Hard Disk Drive in a computer. For instructions on how to format your drive in other operating systems, please visit the following link on our website: http://www.iogear.com/support/til/ index.php?func=TILDisplay&TIL_ID=10087...
Drive Installation (Enclosure Only) Step 6. Attach the ATAPI and power cables to the hard drive in the appropriate ports. Place the bracketed hard drive into the enclosure making sure to slide into place lining up the holes in the bracket with the base plate.
Drive Installation (Enclosure Only) Step 8. Place the side cover on the enclosure and secure Step 7. Insert the two thumb screws through bracket, by hooking on the front first and firmly pressing the back tighten to secure bracket to the internal base plate. together.
ION™ Drive Setup FireWire Installation (It is not necessary to install a driver for FireWire under any OS, however please make sure your computer has all of the latest updates, critical updates, service packs, service releases, OS patches, security updates, and all other OS updates provided by the respective developers.) Note: Before you begin, please make sure that the power to the device and your computer has been turned off.
Your computer will automatically identify the use a FireWire 4 pin(m) to 6 pin(m) cable. IOGEAR part# G2L13946-6; ION™ Drive and load all necessary drivers. or you may pick one up at any local electronics store or catalog reseller.
ION™ Drive Setup Hi-Speed USB 2.0 Installation Note: Before you begin, please make sure that the power to the device and your computer has been turned off. Step 1. Plug the USB Type B connector into the back of the ION™...
ION™ Drive Setup Hi-Speed USB 2.0 Installation Cont. Step 3. Plug the USB Type A connector into your computer’s Step 4. Plug the power adapter into a surge protector. USB 2.0 Port. Step 5. Once complete, turn on ION™ Drive and your computer on.
Installation of ION™ Drive Software (PC) For Windows® 98SE Users Only Step 2. The installer will be copied into “C:\IOGEAR Step 1. Inserting the CD will launch the software installer. GHD335C”. Double-click on the installer icon to begin the Clicking on the first button will copy the installer of the driver driver install.
Installation of ION™ Drive Software (PC) Step 4. The next screen will ask you to click [Finish] to end Step 3. Click [Next] to begin the install. the wizard. After the wizard has quit you simply need to connect the ION Drive to the computer and the driver will be loaded for the drive.
Select folder simply run the installer and then restart your computer. Once your computer has restarted you should find an IOGEAR icon in your systray, click on it to begin using the TRI-Select After your computer restarts you can begin using the TRI- Button Management Software.
Dantz Retropspect Express & TRI-Select Button Management Software TRI-Select Button Management Software Introduction In the software you will see a box next to each shape, this is where the path to the selected backup script will be The TRI-Select Button Management Software allows you to displayed.
Dantz Retrospect Setup Button 1 Step 2. Choose what you want backed up, backing up your To begin setting up the square (top) button on your TRI-Select “Documents only” will backup all documents in your hard drive. ION Drive simply press the button. At this point Retrospect Choosing “Entire volume”...
Dantz Retrospect Setup Step 4. Finally you can click [Finish] to complete the setup Step 3. Choose your appropriate TRI-Select ION Drive as or you can click [Start Now] to complete the setup and the destination. Once you have chosen click [Next] to begin the backup now.
Dantz Retrospect Setup Buttons 2 & 3 Step 2. Then name the script and it will prompt you to OSD Opera- To begin setting up the next two buttons, launch Dantz Retro- choose your Source(s) and Destination. Click on [Sources] tion spect from your Programs Folder in your Start menu.
Dantz Retrospect Setup Step 4. Click on [Destinations] and it will prompt you to Step 3. Your source is the folder and files you want backed choose your destinations(s). For your first script you will up. When you are finished selecting everything you want to have to click [Creat New] to add a destination option.
Dantz Retrospect Setup Step 5. Name your Disk Backup Set and click the [Select…] Step 6. Choose an encryption type, you can choose from button to choose a disk as your destination, click [OK] after None, Password only and SimpleCrypt. Encryption will protect you have selected your disk, then [Next] to continue.
Dantz Retrospect Setup Step 7. Either use the default location for your Disk Backup Step 8. Now choose your Disk Backup Set from in the window Set or click [Browse…] to choose your own. Click [Next] to and click [OK]. continue when you are ready.
Dantz Retrospect Setup Step 9. If you wish, you can click the [Selecting…] button to Step 10. Then choose Make a “run document” from the choices filter what kind of files are backed up, by default Retrospect and click [Save…]. Retrospect will then prompt you to save will backup “All Files”...
Dantz Retrospect Setup Now that you’ve finished your script you can choose to run it from one of the buttons on your TRI-Select ION Drive. To do so, open up the TRI-Select Button Management Software and decide which button you want to run your script from. Then click on the appropriate folder icon to pick the script from the location you saved it to.
Make sure the drive is turned on before you start-up your computer. Make sure your new IOGEAR® ION™ Drive is the only device hooked into the FireWire® USB 2.0 port. Do not use a hub or repeater in connecting your drive to the computer.
Contacting IOGEAR® Service Support If you are still experiencing problems using your IOGEAR® ION™ Drive, please follow the directions on pg. 35 on how to contact IOGEAR®’s Service Support department for your technical support needs.
Care & Handling Your IOGEAR® storage device is a high performance FireWire® 400/Hi-Speed USB 2.0 Hard Drive (ION™ Drive). The head that reads the information on the disk is a fragile piece of technology. Therefore, care must be taken not to bump the ION™...
. Our TIL has answers to many common questions and problems that may already have solutions available. IOGEAR Service & Support can be reached from 8am to 5pm (PST) Monday through Friday, or at the following address: IOGEAR, Inc.
Technical Support The IOGEAR Service Support representative will be able to serve you much quicker if you are prepared to answer the following questions listed below. What type of Computer are you using? (Mac, PC, or Other) What Operating System are you running on your computer? (Mac OS X Panther, Mac OS 9, Windows XP, Windows 98, etc.)
Appendix Glossary Cache - High-speed Random Access Memory (RAM) used as a buffer between the CPU and a hard drive. The cache retains recently accessed information to speed up subsequent accesses to the same data. When data is read from or written to disk, a copy is saved in the cache along with the associated disk address.
Power Adapter Port - The plug on the ION™ Drive into which the power-cord is plugged into. Service Support - The team of IOGEAR employees dedicated to help you resolve your technical issues. Spin down - The act of the disk inside the drive or cartridge ceasing its rotation.
Radio & TV Interference Statement WARNING!!! This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.