IOGear Tri-Select COMBO ION GHE335C User Manual page 25

Dantz Retropspect Express & TRI-Select Button Management Software
TRI-Select Button Management Software Introduction
The TRI-Select Button Management Software allows you to
configure each button for your custom backup sets as you
wish. The Button Management Software identifies each disk
1
for you by drive letter and serial number
drive letter and serial number are red and you can begin con-
figuring the buttons. Each button is identified by the shape
that appears on it. The top button is the square
4
button is the circle and the bottom button is the triangle
2
. When selected the
3
, the middle
1 2
3
6
8
4 7
5
9
In the software you will see a box
is where the path to the selected backup script will be
displayed. To choose a backup script for that button you
want to click on the folder icon
decide you no longer want that button active simply click
8
the red X next to the folder icon and it will clear the box of
your selected path.
Whenever you have a drive connected you want the TRI-
5
. Select Button Management Software active so be sure to
minimize rather than close it whenever you are done using
it. If you connect a new drive and want to configure its
buttons be sure to click the Refresh button
software will scan for all new drives and list them as it finds
them.
23
6 next to each shape, this
7 below its box. If you ever
9
and the