■Leading Curtain Sync Mode
Refer to page 32 for the features and conditions of use
of this sync mode.
Procedure
1
Set the power switch to the (ON) position.
2
Set the sync mode switch to leading curtain sync
(
).
3
Confirm that the subject is within the effective
flash range and the ready lamp is lit. Then take a
picture.
■Trailing Curtain Sync Mode
Refer to page 32 for the features and conditions of use
of this sync mode.
Procedure
1
Set the power switch to the (ON) position.
2
Set the sync mode switch to trailing curtain sync
(
).
3
Confirm that the subject is within the effective
flash range and the ready lamp is lit. Then take a
picture.
● The flash unit will switch to the trailing curtain
sync mode when the shutter release button is
pressed halfway down.
33