Table of Contents
Advertisement
When Attaching the AF540FGZ to the Camera for Control Flash
Control flash only: not
used for main flash
(Preparation of Flash Unit Attached to Camera)
1
Firstly, set the wireless mode and channel of the
flash unit attached to the camera, and register
them on the camera.
Attach the AF540FGZ to the hot shoe of the
camera after turning the camera off.
42
Main flash
Set the power switch of the flash unit to
(WIRELESS).
Press the wireless mode button (M/C/S) the
number of times required to display CONTROL
on the LCD panel.
Slide down the setting switch to the (yellow
dot) to display the channel on the LCD panel.
Press the channel button (CH) and select a
channel from 1CH to 4CH.
Slide the setting switch back up to the (white
dot).
Advertisement
Table of Contents
