Slave - Pentax 540FGZ - AF - Hot-shoe clip-on Flash Operating Manual

■Slave

With the AF540FGZ, you can take photographs with
the flash unit separated from the camera wirelessly in
auto or manual mode.
Combine the flash unit with the built-in flash unit of the
camera or another flash unit attached to the camera.
Before photographing, confirm the following.
1. Whether you can use this function with the
combination of your camera and the flash mode
you have set.
➝ Functions Related to Each Flash Mode
(page 64 - 71)
2. Precaution When Photographing with a Slave
Flash (page 79)
● Refer to page 63 for cameras that support
wireless mode.
50
Procedure
1
Confirm that the slave mode is set to SL2. (Refer
to page 52.)
2
Set the flash unit's power switch to (WIRELESS).
3
Press the wireless mode button (M/C/S) the
number of times required to display SLAVE on
the LCD panel.
4
Press the flash mode button (MODE) to set the
flash mode.