Back-Up Warning; System Programming; Edit Program K E Y - FUTABA PCM1024H Instruction Manual

Back Up Warning
When the stored data is lost, the characters
"BACK UP" blink on the screen and a buzzer
sounds. When the power switch is turned on
again, the error display disappears and all the
settings return to the factory-set values. When a

SYSTEM PROGRAMMING

Press the EDIT program key
Reversing Fail Safe Adjustable
Travel Volume
Pressing the (EDIT)
standard screen will display the EDIT or "Menu"
screen. The
used to move the cursor bar to Line 1, 2, or 3 of
the screen. The program keys are used to select
of the standard screen.
Dual Rate
Adjustable
Function Rate
program key of the
cursor keys can be and
Back Up error occurs, the back-up lithium bat-
tery is probably dead, or there is trouble in the
system. To locate the cause, call your Futaba
service center. The back up lithium battery life
depends on the usage state, but is about 5 years.
System functions are programmed
and adjusted by using the LCD
display
four CURSOR keys.
End
(Returns to
preceding screen)
the desired programminq screen to be displayed.
NOTE: At all times, pressing the
key will return the display to the next previous
screen. To return to the standard screen, just
keep pressing the
[13]
screen, the five DATA
INPUT (Program) keys, and the
program
key.