FUTABA CGY750 Instruction Manual page 7

transmitter, always set the throttle servo maxi-
mum operating point to less than the point at
which the governor is activated. If this is not done
the governor may activate while in condition hold.
While preparing for flight or starting the engine
always ensure the throttle remains below the gov-
ernor activation point and do not select any flight
modes that may activate the governor.
If you prefer to activate the governor while the
model is still on the ground always ensure that
you have at least -5 degrees of pitch in the model
before activating the governor. This is necessary
to prevent an unexpected lift off as the governor
activates and the head speed increases to the
ensure proper governor operation. Due to the
high level of vibration and centrifugal forces the
magnet may come loose or the sensor alignment
may change. Verify that the magnet and sensor
are properly mounted every 10th flight.
P
RECAUTIONS