FUTABA CGY750 Instruction Manual page 4

P
RECAUTIONS
WARNING
Failure to follow these safety precautions may
result in severe injury to yourself and others.
ing this product.
BEFORE EACH FLIGHT:
Always check the transmitter and receiver bat-
tery voltage to ensure they have enough remain-
ing capacity to complete the flight.
Always exit programming mode before at-
tempting to fly the model.
Only use the CGY750 with a 2.4GHz system
such as the Futaba FASST™ system, or a PCM
system. Use with an FM system is strongly dis-
couraged since interference can cause serious
operational problems.
The CGY750 requires 5-10 seconds to ini-
tialize when the power is turned on. Do not
move the helicopter and do not move the tail
rotor, aileron and elevator sticks during this
initialization or the gyro may not initialize
properly. Once the initialization process has
been completed the swash servos and tail
servo will move several times indicating that
the CGY750 is now ready for flight.
Verify that the gyros are operating and com-
pensating in the correct direction before each
flight. If the compensation direction is incorrect
on any axis the model will become incontrollable
after take off.
Verify that the gyro is operating in the desired
mode.
Gyro
-