FUTABA CGY750 Instruction Manual page 42

E G B S
LEVATOR YRO ASIC ETTING
The top line shows the Elevator Gyro Base Gain
and the bottom line shows the actual working
gain as set within the transmitter. If the elevator
Gain Channel is set to [INH] within the CGY750
[S.Bus]->Basic setting menu, then the remote
transmitter gain adjustment is not available and
the actual working gain is set by using data [+]
or [-] keys within this setting menu.
Selects the gyro working mode. The available
options are CMT, Normal or AVCS. The CMT
mode will allow you to select either AVCS or
Normal mode by using the gyro gain channel.
The Normal mode will always operate in Normal
AVCS Mode. Use the data [+] or [-] key to select
the desired working mode.