FUTABA CGY750 Instruction Manual page 75

The governor goes into the failsafe mode when
the battery voltage is below BFS.Volt. When
activated, the governor is deactivated and the
throttle servo is moved to B/FS position. Move
the throttle stick to idle position. The B/FS
Move the throttle stick to B/FS position as de-
sired. Push set key to confirm the setting. Push-
This works the revolution compensation dur-
ing pirouette. Set the mode to match the gyro
installing direction, either CW/TOP, CW/BOTM,
CCW/TOP, CCW/BOTM by pushing the Set key.
At the governor only mode, this function is in-
hibited.
CW: clockwise
CCW: counter clockwise
TOP: normal side
BOTM: reverse side
G
OVERNOR
B S
ASIC ETTING
-