Warning
Please read this instruction carefully before use and follow this instruction to operate the device in order to prevent
damages on the device or injuries to staff.
Switch off the power before wiring.
RTU-DNET is an OPEN TYPE device and therefore should be installed in an enclosure free of airborne dust,
humidity, electric shock and vibration. The enclosure should prevent non-maintenance staff from operating the
device (e.g. key or specific tools are required for operating the enclosure) in case danger and damage on the
device may occur.
RTU-DNET is to be used for controlling the operating machine and equipment. In order not to damage it, only
qualified professional staff familiar with the structure and operation of RTU-DNET can install, operate, wire and
maintain it.
DO NOT connect input AC power supply to any of the I/O terminals; otherwise serious damage may occur. Check
all the wirings again before switching on the power and DO NOT touch any terminal when the power is switched
on. Make sure the ground terminal
Table of Contents
1
INTRODUCTION ....................................................................................................................................3
1.1
Features ......................................................................................................................................3
1.2
Functions.....................................................................................................................................3
1.3
Specifications ..............................................................................................................................3
1.4
2
PRODUCT PROFILE & OUTLINE .........................................................................................................5
2.1
Dimension ...................................................................................................................................5
2.2
Product Profiles ...........................................................................................................................5
2.3
DeviceNet Connection Port .........................................................................................................6
2.4
RUN/STOP Switch ......................................................................................................................6
2.5
Address Switch ...........................................................................................................................6
2.6
Function Switch...........................................................................................................................6
2.7
Extension Port .............................................................................................................................7
3
BASIC OPERATION...............................................................................................................................7
3.1
3.2
3.3
4
HOW TO CONFIGURE RTU-DNET .......................................................................................................8
4.1
Terms ..........................................................................................................................................8
4.2
DVP-PLC Application Manual
DeviceNet Remote I/O Communication Module RTU-DNET
is correctly grounded in order to prevent electromagnetic interference.
1