Table of Contents
Advertisement
DeviceNet Remote I/O Communication Module RTU-DNET
3.3 Connecting to DeviceNet Connection Port
The colors on the PINs on the DeviceNet connection port match the colors of the connection cables. Make
sure you connect the cable to the right PIN.
We recommend you also apply Delta's power module in the connection.
4
How to Configure RTU-DNET
In this section we will introduce how RTU-DNET as a DeviceNet slave realizes the data exchange between
DeviceNet master and DVP Slim DI/DO extension unit.
DeviceNet master sends the data to Slim DI/DO.
RTU-DENT sends the input data from Slim DI/DO to DeviceNet master.
4.1 Terms
No.
Item
1
Control word
2
Status word
Number of digital
3
input points
Number of digital
4
output points
8
DVPDNET-SL
DVP28SV
DVPDNET
DVP28SV
RUN
STOP
Master
DeviceNet
Unit
For setting up the mode of RTU-DNET, e.g. "H8000" for STOP
Word
mode and "H8001" for RUN mode. See 4.3 for more details.
Word
Displaying the status of RTU-DNET. See 4.3 for more details.
The digital input points shall be 8's multiple. The number will be
Bit
regarded as 8 when it is less than 8 and as 16 when it is bigger
than 8 but less than 16.
The digital output points shall be 8's multiple. The number will be
Bit
regarded as 8 when it is less than 8 and as 16 when it is bigger
than 8 but less than 16.
Explanation
DVP-PLC Application Manual
Advertisement
Table of Contents
