Secure The Cw9166I-Mr, Cw9164I-Mr; Security Screw; Kensington Lock - Cisco Meraki CW91661-MR Hardware Installation Manual

4.3 Secure the CW9166I‐MR, CW9164I‐MR
Depending on your mounting environment, you may want to secure the CW9166I‐MR, CW9164I‐MR to its mount
location. Your CW9166I‐MR, CW9164I‐MR
can be secured in several ways. If the CW9166I‐MR, CW9164I‐MR has been installed using the mount plate, it
can be secured via security screw (Torx and Philips head security screws are included; choose one), and/or
Kensington lock. If the mount
plate was not used, the CW9166I‐MR, CW9164I‐MR can still be secured using a Kensington lock.
4.3.1 Security
Install the security screw in the lower mount plate tab.
4.3.2
Kensington Lock
Attach a Kensington lock cable to the access point at the hard point on the side of the device.
Attach the other end of the cable to a secure location, such as a pipe or building fixture.
22
Screw