Overview
Setting Up a USB Driver
The following subsections describe setting up a USB driver if you connect a PC to the USB port on the SBG940.
Before connecting a PC to the USB port, perform the appropriate procedure for your Windows version:
•
Setting Up a USB Driver in Windows 98 Second Edition
•
Setting Up a USB Driver in Windows 2000
•
Setting Up a USB Driver in Windows Me
•
Setting Up a USB Driver in Windows XP
The SBG940 USB driver does not support Macintosh or UNIX computers. For those systems, you can connect
through Ethernet only.
Caution!
Be sure the SBG940 Installation CD-ROM is inserted in the CD-ROM drive before you plug in the
USB cable.
If you have a problem setting up the USB driver, remove it by performing one of:
•
Removing the USB Driver from Windows 98 Second Edition or Windows Me
•
Removing the USB Driver from Windows 2000
•
Removing the USB Driver from Windows XP
Then perform
"Running the Motorola USB Driver Removal Utility"
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
Contact
FAQ
Specifications Glossary License
on page 107.
89