Table of Contents
Advertisement
Overview
Only one computer at a time connected to the SBG940 can use an application requiring port triggering. Use this
page to view predefined port triggers:
Gateway > PORT TRIGGERS — predefined page fields
Field
Name
Enable
Protocol
Port Range
Session Chaining
Session Interval
Address Replace
Multi Host
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
Description
Displays the unique name for the port triggers. This is typically the protocol name.
Select this box to activate the port triggers for the predefined application.
Displays the transport protocol for the port trigger — TCP or UDP.
Displays the port range (From/To) for the port trigger.
Displays the session chaining selection for the port trigger — Disable, TCP, or TCP/UDP.
Displays the session interval set for the port trigger.
Displays the address replacement method for the port trigger.
Displays the multi host selection for the port trigger.
Contact
FAQ
Specifications Glossary License
50
Advertisement
Table of Contents
