Table of Contents
Advertisement
Overview
7
Click Protocol and click Add. The Select Network Protocol window is displayed:
8
Click Microsoft in the Manufacturers section and click TCP/IP in the Network Protocols section.
9
Click OK.
10
Click TCP/IP on the Network window. If there is more than one TCP/IP entry, choose the one for the Ethernet
card or USB port connected to the SBG940.
11
Click Properties. The TCP/IP Properties window is displayed:
12
Click the IP Address tab.
13
Click Obtain an IP address automatically.
14
Click OK to accept the TCP/IP settings.
15
Click OK to close the Network window.
16
Click OK when prompted to restart the computer and click OK again.
When you complete TCP/IP configuration, go to
Windows
Me".
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
"Verifying the IP Address in Windows 98, Windows 98 SE, or
Contact
FAQ
Specifications Glossary License
55
Advertisement
Table of Contents
