Table of Contents
Advertisement
Overview
5
Choose the WPA Authentication type:
Remote
If a Remote Authentication Dial-In User Service (RADIUS) server is available, you can select this
(Radius)
option and go to step 6. A RADIUS server is typically used in a large corporate location.
Local
If you choose Pre-Shared Key (PSK) local authentication, if the passphrase on any client
(WPA-PSK)
supporting WPA matches the PSK Passphrase set on the SBG940, the client can access the
SBG940 WLAN. To set the PSK Passphrase, go to step 7. A local key is typically used in a home
or small office.
6
For Remote (Radius) authentication only, set:
Radius Port
The port used for remote authentication through a RADIUS server. It can be from 0 to 65535.
Radius Key
The key for remote authentication. It can be from 0 to 255 ASCII characters.
Radius Server
Currently IPv4 only.
Type
Radius Server The RADIUS server IP address in dotted-decimal format (xxx.xxx.xxx.xxx).
7
For Local (WPA-PSK) authentication only, set:
PSK
The PSK password containing from 8 to 63 ASCII characters. You must set the identical
Passphrase
passphrase on each WLAN client (see
8
Click Save Changes.
If you need to restore the wireless defaults, click Reset Wireless Defaults.
SBG940 User Guide
Installation Troubleshooting
Configuration: Basic Gateway TCP/IP Wireless USB
Contact
FAQ
Specifications Glossary License
"Configuring a Wireless Client for
WPA").
70
Advertisement
Table of Contents
