Canon Wireless Transmitter WFT-E5A Instruction Manual page 60

Remote Capture [Camera control]
⑯
60
Set the lens focus mode switch to
2
<f>.
Under these conditions, click the release button
(⑤). When you let go of the mouse button, the
camera autofocuses and shoots. (See step 5.)
With One-Shot AF, the camera does not shoot
unless focus is achieved. Try following the next
steps to display Live View image and shoot after
manually focusing.
Display Live View image.
3
Click the Live View shooting button (⑯).
The AF/MF switch (⑥) is set to <g>, and Live
View image is displayed.
⑱
If Live View image is not displayed, enable Live
View shooting in the menu (⑮).
To make Live View image display more
responsive, click the Live View image size
switching button (⑱). Live View image is now
displayed at a smaller size, improving
responsiveness. To restore the original size, click
this button again.
Manually adjust the focus.
4
Click the buttons <
<
autofocus is not supported during Live View image
display.
To focus more closely, click <
<
<
Three levels of focus adjustment are available.
<
<
<
>, <
>, and < > to adjust the focus. Note that
>. To focus farther away, click <
>, or < >.
> < > : Largest increment
> < > : Intermediate increment
> < > : Smallest increment
>, < >, < >,
>, < >, or
>,