Setting Up Linked Shooting - Canon Wireless File Transmitter WFT-E4 II A Instruction Manual

Setting Up Linked Shooting

First, establish a connection from the slave cameras to the master camera. Because linked
shooting utilizes a wireless connection via IEEE 802.11g in ad hoc mode, it is not available over
wired LANs.
66
Display the transmitter menu.
1
On the camera, press the <7> button.
On the [5] tab, select [WFT settings] and press
<0>. [WFT settings] is added to the tab after
you attach the transmitter.
Select [Connection wizard].
2
Select [LinkedShot].
3
Set up the slave cameras.
4
Select [Slave].
The slave cameras are now ready, with the
following screen displayed.
When using multiple slave cameras, set up all
slave cameras to slave state.
Once the settings are complete, slaves cannot be
added or removed. You must repeat the setup
process from step 1.