Table of Contents
Advertisement
Remote Capture [Camera control]
⑯
60
Set the lens focus mode switch to
2
<f>.
Under these conditions, click the release button
(⑤). When you let go of the mouse button, the
camera autofocuses and shoots. (See step 5.)
With One-Shot AF, the camera does not shoot
unless focus is achieved. Try following the next
steps to display Live View image and shoot after
manually focusing.
Display Live View image.
3
Click the Live View shooting button (⑯).
The AF/MF switch (⑥) is set to <g>, and Live
View image is displayed.
If Live View image is not displayed, enable Live
View shooting in the menu (⑮).
Manually adjust the focus.
4
Click the buttons <
<
>, and <
autofocus is not supported during Live View image
display.
To focus more closely, click <
<
>. To focus farther away, click <
<
>, or <
Three levels of focus adjustment are available.
<
> <
<
> <
<
> <
>, <
>, <
> to adjust the focus. Note that
>.
> : Largest increment
>
: Intermediate increment
>
: Smallest increment
>, <
>,
>, <
>, or
>,
Advertisement
Table of Contents
