JVC JY-VS200U - Professional Dv 1-ccd Camcorder User Manual page 23

24
RECORDING
EN
Power Switch
SNAPSHOT
Button
Lock Button
Recording Start/Stop Button
JY-VS200U EN 02-35
Advanced Features For Video And D.S.C.
Progressive Mode Recording
Shooting
Mode Switch
This mode lets you record moving images (successive
jitter-free still images) onto a tape. Images can then played
back jitter-free, with superior quality. High-resolution still
images can also be processed on a personal computer or
can be printed out (
1
Set the Shooting Mode Switch to "VIDEO", then set
the Power Switch to "
Lock Button located on the switch. Pull out the
viewfinder fully or open the LCD monitor fully .
2
Set "CAMERA MODE" to "PS-VIDEO" in the Menu
Screen (
3
To start Progressive Mode Recording, press the
Recording Start/Stop Button.
To End Progressive Mode Recording . . .
.... press the Recording Start/Stop Button. The camcorder
enters the Record-Standby mode.
NOTES:
When an image recorded using the Progressive Mode is
played back, the image may not look natural.
When "CAMERA MODE" is set to "PS-VIDEO", Picture
Wipe/Dissolve (
special effects (
If SNAPSHOT is pressed in the PS-VIDEO mode, a
snapshot will be recorded with higher quality than in
VIDEO mode. However, "MULTI-4" and "MULTI-9"
cannot be used (
24
pg. 57).
" while pressing down the
pg. 28, 29).
pg. 34) and some Program AE with
pg. 36) cannot be used.
pg. 20).
01.3.12, 6:55 PM