JVC JY-HM360AG Instructions Manual
JVC JY-HM360AG Instructions Manual

JVC JY-HM360AG Instructions Manual

Hd memory card camera recorder
Hide thumbs Also See for JY-HM360AG:

Advertisement

.
HD MEMORY CARD CAMERA RECORDER
JY-HM360AG
.
The specifications and appearance of this product are subject to changes for further improvement
without prior notice.
Please check the latest version of the INSTRUCTIONS from the following Mobile User Guide. You can
also download the PDF from the Mobile User Guide.
Mobile User Guide
When you are outside, you can refer to the instructions from your Android phone or iPhone.
http://manual3.jvckenwood.com/pro/mobile/global/
You can view the Mobile User Guide using the browser on your Android phone or iPhone.
This product does not come with a battery pack.
When using a battery, please purchase the recommended battery pack (SSL-JVC50).
IM 1.00
INSTRUCTIONS (BASIC)
This manual provides a brief explanation on
operating this camera recorder. For detailed
operation methods and camera settings,
please refer to the following Mobile User
Guide.
Please read the following before getting started:
Thank you for purchasing this JVC product.
Before operating this unit, please read the
instructions carefully to ensure the best
possible performance.
B5A-1538-00

Advertisement

Table of Contents
loading

Summary of Contents for JVC JY-HM360AG

  • Page 1 This product does not come with a battery pack. When using a battery, please purchase the recommended battery pack (SSL-JVC50). Please read the following before getting started: Thank you for purchasing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best possible performance.
  • Page 3: Safety Precautions

    Safety Precautions When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow CAUTION: for ventilation (10 cm or more on both The mains plug shall remain readily sides, on top and at the rear).
  • Page 4 Battery Pack (sold separately) CAUTIONS: The battery pack is a lithium-ion battery. To prevent shock, do not open the Before using the battery pack, be sure to cabinet. No user serviceable parts read the following cautions: inside. Refer servicing to qualified personnel. Terminals To avoid hazards When you are not using the AC...
  • Page 5: Table Of Contents

    Contents Content of this manual Symbols used Introduction Caution : Describes precautions concerning the Safety Precautions ..........3 operation of this product. Contents ............5 Memo : Describes reference information, such as Verifying the Accessories ........5 functions and usage restrictions of this Names of Parts ..........
  • Page 6: Names Of Parts

    Names of Parts HOLD IN OUT Bottom R S T FOCUS ZOOM A Built-in Microphone S [C.REVIEW/7] Clip Review/User 7 Button B Tally Lamp T Zoom Lever at the Grip C Microphone Holder U [TC] TC Input/Output Terminal D Microphone Holder Lock Knob V [IN/OUT] TC IN/OUT Selection Switch E Shoe W Hood Release Button...
  • Page 7 Side Control Panel SD Slot S R Q FOCUS ASSIST/1 OIS / 2 LOLUX / 3 TIME CODE SCENE SELECT FOCUS MENU/THUMB AE LEVEL AUTO POWER MANU AUTO LOCK MODE CANCEL GAIN WHT BAL SHUTTER IRIS FULL AUTO AE LOCK/4 ZEBRA/5 MARKER/6 PUSH AUTO...
  • Page 8 LCD Monitor Lens Section MENU/THUMB INPUT1 INPUT2 MONITOR LINE INPUT1 BOTH INPUT2 +48V LCD BRIGHT PEAKING DISPLAY STATUS AUTO MANUAL CANCEL A Filter Built-In Screw Installable filter types: φ46mmP0.75 Memo : A LCD Monitor Remove the lens hood when installing the filter. B [MENU/THUMB] Menu/Thumbnail Button B Lens Cover Open/Close Switch C LCD Cross-Shaped Button (JKHI)/Set Button...
  • Page 9: Adjusting The Grip Belt

    Adjusting the Grip Belt Attaching/Detaching the Hood Open the pad and adjust the position of the grip belt accordingly. Attaching the Hood Align the markings on the camera recorder and hood; turn the hood in the direction of the arrow until it is locked.
  • Page 10: Using A Battery Pack (Sold Separately)

    Using a Battery Pack (sold Removing the Battery separately) Charging the Battery Charge the battery immediately after purchase or when the battery power is running low. POWER POWER /CHG MODE 1 Hold down the lock button (blue) at the POWER center of the [POWER ON/OFF] switch to set to “OFF”.
  • Page 11: Configuring The Initial Settings

    Configuring the Initial o Continuous operating time Approx. 6 hrs (SSL-JVC50) Settings Memo : Actual operating times may differ depending on the age of the battery, charging condition, and When the power is first turned on, the Initial Setting operating environment. screen for performing the initial settings in the Operating time is shortened in cold camera recorder appears.
  • Page 12 2 Ensure that the lens cover is closed, and 4 Set the time zone and date/time. press the Set button (R). A Move the cursor with the cross-shaped button Self-diagnosis starts. (HI) and select the setting item. A progress bar appears, and “Complete B Change the values with the cross-shaped Diagnosis”...
  • Page 13: Usable Cards

    Usable Cards QuickTime H.264/HD H.264/SD Use a Class 6/10 SD card. 1080i/1080p 1080i 576i Memo : 4 GB Depending on the recording format, SD card 8 GB with Class 4 or higher performance can also be 16 GB used. 32 GB To use an SDHC card, set [4GB File 64 GB (SDXC)
  • Page 14 Formatting (Initializing) SD Cards 5 Formatting starts. When the following cards are inserted, [!FORMAT] appears at the remaining media display area. Format the card using the camera recorder menu. Unformatted SD cards SD cards formatted under different specifications Caution : Be sure to format the SD card on this camera recorder.
  • Page 15 A number in automatic ascending order is assigned in System Format Record Folder the recording order. QuickTime DCIM or PRIVATE/JVC/ The Clip Number can be reset in (MPEG2) CQAV* the menu.* MP4(MPEG2) PRIVATE/JVC/BPAV Clip Name Prefix (any four alphanumeric characters)
  • Page 16: Shooting

    Basic Shooting Shooting Procedures 1 Configure the video and audio input settings. Set the [FULL AUTO ON/OFF] switch to “ON” to enter Full Auto mode. This mode adjusts Preparations the Iris, Gain, Shutter and White Balance automatically. The audio recording level is also set to Auto, and audio from the built-in microphone is recorded in the Full Auto mode.
  • Page 17: Using Scene Select

    2 Press the [MENU/THUMB] button. Memo : The Scene Select setting menu appears. [Clip Review] is assigned to [C.REVIEW/7] button in factory default. Cursor [Clip Review] can also be assigned to other user (Orange Frame) buttons. Check Mark Using Scene Select Changing Scene Select Use the [SCENE SELECT] switch to change camera settings easily and promptly according to...
  • Page 18 List of Shooting Modes (Icon) Detailed Settings for Shooting Mode Icon Description Select for indoor shooting. Indoor (*1) Select for outdoor shooting. Outdoor (*1) Returns all current setting values for the [SCENE SELECT] switch 1 Adjust the setting values. (“A” or “B”) to default. A Select the item to adjust.
  • Page 19: Miscellaneous Functions For Shooting And Recording Methods

    Miscellaneous Functions Recording Methods for Shooting and A Recording using both slots A and B Continuous recording (Series Rec): Recording Methods Enables seamless long hour continuous recordings over the slots. Record simultaneously at the same definition This camera recorder is equipped with various (Dual Rec): functions for shooting.
  • Page 20: Playing Recorded Clips

    Playing Recorded Clips Time Code Playback Time code or user’s bit recorded on an SD card can be displayed on the LCD monitor and viewfinder. Use the operation buttons on the side control panel Memo : of the camera recorder to play back. The time code is also superimposed on the video signal output from the [HD/SD SDI] output terminal.
  • Page 21: Connecting External Devices

    Connecting External * Select the output signal in [A/V Set] B [HDMI out]. Monitor * To display the menu screen or display screen on an external monitor, set [A/V Set] B [Video Set] To output live or playback video images and audio sound to an external monitor, select the B [Display On TV] to “On”.
  • Page 22: Loading Clips To The Pc

    Loading Clips to the PC 2 Select [Change] using the cross-shaped button (JK), and press the Set button (R). The camera recorder switches to USB mode. You can load clips to a PC by connecting the camera recorder to the PC via the USB port. Doing so enables clips stored in the SD card to be managed and edited on the PC.
  • Page 23: Menu Screen Hierarchical Chart

    Menu Screen Hierarchical Chart Main Menu... TC/UB... Camera Function... TC Generator Bars TC Preset UB Mode Flicker Correction Drop Frame Shutter AE Level LCD/VF... AE Speed Shooting Assist... AGC Limit Marker Settings... Smooth Trans Display Settings... GAIN L LCD + VF GAIN M VF Bright GAIN H...
  • Page 24: Basic Operations In Menu Screen

    Basic Operations in Menu A [MENU/THUMB] Button Displays the menu screen. The [Main Screen Menu] screen is displayed by default. During normal usage, [Main Menu] is Press the [MENU/THUMB] button on the side displayed if the previous menu operation ended at [Main Menu], and [Favorites control panel of the camera recorder or on the LCD monitor to display the menu screen on the Menu] if the previous menu operation ended...
  • Page 25: Display Screen

    Display Screen B Voltage/Battery Power Displays the current status of the power supply in use. Memo : Display Screen in Camera Mode Displayed in the Display 0 and Display 1 screens during warnings only. Display 0 screen C Remaining Space on Media This screen displays the event.
  • Page 26 D Resolution H AE Lock Displays the video image resolution. The U icon is displayed during AE lock. Memo : I Scene Select/Full Auto When the [SCENE SELECT] switch is set to This item is not displayed when [Main Menu] B “A”...
  • Page 27 M Iris F-Number R Zebra pattern Displays F-number of the lens iris. During zebra pattern display, (zebra icon) N Gain is displayed on the display screen in Camera Displays the gain value when in the Manual mode. Gain mode. S Focus Assist “LUX30”...
  • Page 28 STBY C : Clip Continuous Rec recording Memo : standby You can specify the display method (Number/ : Clip Continuous Rec recording RRECC Bar) in [LCD/VF] B [Display Settings] B “Zoom”. STBYC : Clip Continuous Rec recording This item will not be displayed when “Off” is pause (displayed in selected.
  • Page 29: Display Screen In Media Mode

    Display Screen in Media Mode A Media Displays the media slot (A or B) of the Media Display 0 Screen currently played clip. z appears when the write-protect switch of This screen displays the media status or event. It the SD card is set. is also used to display warnings only.
  • Page 30: Status Screen

    Status Screen J Time Code (I)/User’s Bit (J) Display Displays the time code (hour: minute: second: frame) or user’s bit data recorded in This screen allows you to check the current the SD card being played back. settings. Example of time code display: To display the status screen, press the [STATUS] button in the normal screen.
  • Page 31: Troubleshooting

    Troubleshooting Symptom Action Power does not turn on. Is the AC adapter properly connected? Is the battery charged? Is the power turned on immediately after it is turned off? Make sure to wait for an interval of at least 5 seconds before turning on the power again.
  • Page 32: Precautions For Proper Use

    Precautions for Proper Power Saving o When this unit is not in use, be sure to set the [POWER ON/OFF] switch to “OFF” in order to reduce power consumption. Storage and Usage Locations Maintenance o Allowable ambient temperature and humidity o Turn off the power before performing any Be sure to use this unit within the allowable maintenance.
  • Page 33 o Do not use pencils or ballpoint pens to write on SDHC/SDXC Cards the SD cards. Always use oil-based pens. o SDHC/SDXC card is referred to as SD card in o If you format (initialize) the SD card, all data this manual.
  • Page 34 License Notices Others o MPEG LA AVC o Do not insert objects other than the memory card THIS PRODUCT IS LICENSED UNDER THE into the card slot. AVC PATENT PORTFOLIO LICENSE FOR o Do not block the vent on the unit. THE PERSONAL USE OF A CONSUMER OR Blocking of the vent causes internal heating and OTHER USES IN WHICH IT DOES NOT...
  • Page 35 Content of this manual All rights reserved by JVC KENWOOD Corporation. Unauthorized duplication or reprinting of this manual, in whole or in part, is strictly prohibited. Illustrated designs, specifications and other contents of this manual are subject to change for improvement without prior notice.
  • Page 36: Specifications

    Specifications Lens Section Item Description General Lens F1.2, f=3.76 mm to 37.6 mm (Conversion to 35 mm camera Item Description format: f = 29.9 mm to 586 mm: dynamic zoom) Power DC 12 V Filter diameter Φ46 mm Power Approx. 6 W consumption (When recording in the factory default settings using the...
  • Page 37 Item Description Video/Audio SD mode (MOV: H.264) Video QuickTime File Format Item Description recording file Recording time Approx. 25 minutes (8 GB SD format card, 35 Mbps, VBR mode) Video MPEG-4 AVC/H.264, 8 Mbps HD mode (MOV/MP4: MPEG-2) 720x576/50i Video QuickTime File Format (For Audio LPCM 2ch, 48 kHz/16 Bit...
  • Page 38: Software License Agreement

    Licensed the “Licensed Software”) provided by Software. JVC KENWOOD Corporation (hereinafter the “Licensor”) is copyrighted to or sublicensable by Article 4 Right pertaining to the Licensed the Licensor, and this Agreement provides for the...
  • Page 39: Important Notice Concerning The Software

    A Turn on the power. components (hereinafter the “Licensed Software”), B Press the [MENU/THUMB] button. a copyright of either JVC KENWOOD Corporation C Select [Main Menu] B [System] B [System (hereinafter “JKC”) or a third party subsists. Information] B [Open Source License].
  • Page 40 B5A-1538-00 © 2016 JVC KENWOOD Corporation...

Table of Contents