Date/Time Settings - JVC JY-VS200U - Professional Dv 1-ccd Camcorder User Manual

Power Switch
Power Lamp
Lock Button
MENU Wheel
Display
FADER / W I PE F . WH I TE
PROGR AM AE
W. BAL AN E C
CAMER A
MANUA L
SYSTE M
D I SPL AY
DSC
END
ON SC RE N E – LCD / TV
DATE / T I ME – A UTO
T I ME CODE – O N
CLOCK D E C 25 '00
ADJ . : 5 30 PM
RETUR N
CLOCK D E C 25 '00
ADJ . : 5 30 PM
JY-VS200U EN 02-35

Date/Time Settings

The date/time is recorded onto the tape at all times, but its
display can be turned on or off during playback
( pg. 41).
1
Set the Power Switch to "
the Lock Button located on the switch, and open the
LCD monitor fully or pull out the viewfinder fully .
The power lamp lights and the camcorder is turned
on.
2
Press the MENU wheel. The Menu Screen appears.
3
Rotate the MENU wheel to select "
Press it and the DISPLAY Menu appears.
4
Rotate the MENU wheel to select "CLOCK ADJ.".
Press it and "month" is highlighted.
Rotate the MENU wheel to input the month. Press it.
Repeat to input the day, year, hour and minute.
Rotate the MENU wheel to select "1RETURN", and
press it twice. The Menu Screen closes.
Built-in Clock's Rechargeable Lithium Battery
To store the date/time in memory, the clock's rechargeable
lithium battery is integrated in the camcorder . While the
camcorder is connected to an AC outlet using the AC
Power Adapter/Charger, or while the battery pack attached
to the camcorder continues to supply power , the clock's
rechargeable lithium battery is always char ged. However,
if the camcorder is not used for approx. 3 months, the
clock's lithium battery will become dischar ged and the
date/time stored in memory will be lost. When this occurs,
first connect the camcorder to an AC outlet using the AC
Power Adapter/Charger for over 24 hours to charge the
clock's rechargeable lithium battery. Then perform the
date/time setting before using the camcorder .
Note that the camcorder can be used without setting the
DISPLAY Menu
date/time.
NOTE:
Even if you select "CLOCK ADJ.", if the parameter is not
highlighted the camcorder 's internal clock continues to
operate. Once you move the highlight bar to the first date/
time parameter (month), the clock stops. When you finish
setting the minute and press the MENU wheel, the date
and time begin operation from the date and time you just
set.
11
EN
" while pressing down
DISPLAY".
01.3.12, 6:55 PM
11