JVC JY-VS200U - Professional Dv 1-ccd Camcorder User Manual

Jy-vs200u user manual -- pages 2-35 (1231kb)
Hide thumbs Also See for JY-VS200U - Professional Dv 1-ccd Camcorder:

Advertisement

2
EN
Dear Customer,
Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions
contained in the following pages to ensure safe use of this product.
Using This Instruction Manual
• All major sections and subsections are listed in the Table Of Contents on the cover page.
• Notes appear after most subsections. Be sure to read these as well.
• Basic and advanced features/operation are separated for easier reference.
It is recommended that you . . .
..... refer to the Index (
pgs. 81 – 88) and familiarize yourself with button locations, etc. before use.
..... read thoroughly the Safety Precautions and Safety Instructions that follow . They contain extremely important
information regarding the safe use of this product.
You are recommended to carefully read the cautions on pages 89 through 91 before use.

SAFETY PRECAUTIONS

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The AA-V40U AC Power Adapter/Charger should be
used with:
AC 120 V`, 60 Hz in the USA and Canada,
AC 110 V – 240 V`, 50 Hz/60 Hz in other countries.
CAUTION (applies to the AA-V40U)
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION (s'applique à l'AA-V40U)
POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE
LA PRISE ET POUSSER JUSQU'AU FOND.
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
Caution: (applies to Jack Box)
To reduce the risk of fire, do not remove
cover. No user-serviceable parts inside.
Refer servicing to qualified service person.
JY-VS200U EN 02-35
NOTES:
The rating plate (serial number plate) and safety
caution are on the bottom and/or the back of the
main unit.
The rating plate (serial number plate) of the AC
Power Adapter/Charger is on its bottom.
This camcorder is designed to be used with NTSC-
type color television signals. It cannot be used for
playback with a television of a different standard.
However, live recording and LCD monitor/
viewfinder playback are possible anywhere. Use the
JVC BN-V408U/V416U/V428U battery packs and,
to recharge them, the provided multi-voltage AC
Power Adapter/Charger. (An appropriate conversion
adapter may be necessary to accommodate different
designs of AC outlets in different countries.)
When the equipment is installed in a cabinet or on
a shelf, make sure that it has sufficient space on all
sides to allow for ventilation (10 cm (3-15/16") or
more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper ,
or cloth etc. the heat may not be able to get out.)
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
When discarding batteries, environmental problems
must be considered and the local rules or laws
governing the disposal of these batteries must be
followed strictly.
The apparatus shall not be exposed to dripping or
splashing.
Do not use this equipment in a bathroom or places
with water.
Also do not place any containers filled with water or
liquids (such as cosmetics or medicines, flower
vases, potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equip-
ment, fire or electric shock may be caused.)
2
01.3.12, 6:55 PM

Advertisement

Table of Contents
loading

Summary of Contents for JVC JY-VS200U - Professional Dv 1-ccd Camcorder

  • Page 1: Safety Precautions

    Use the to constitute a risk of electric shock to persons. JVC BN-V408U/V416U/V428U battery packs and, to recharge them, the provided multi-voltage AC The exclamation point within an equilateral triangle is Power Adapter/Charger.
  • Page 2: Important Product Safety Instructions

    IMPORTANT PRODUCT 5. Ventilation Slots and openings in the cabinet are provided for SAFETY INSTRUCTIONS ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. Electrical energy can perform many useful functions. •...
  • Page 3 SERVICING 1. Accessories 1. Servicing To avoid personal injury: If your product is not operating correctly or exhibits a • Do not place this product on an unstable cart, marked change in performance and you are unable stand, tripod, bracket or table. It may fall, causing to restore normal operation by following the detailed serious injury to a child or adult, and serious procedure in its operating instructions, do not...
  • Page 4 TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in damage. Attach only the optional JVC VL-V3U V ideo Light, VL-F3U Video Flash or MZ-V3U Stereo Zoom Microphone to the camcorder’s Info-Shoe.
  • Page 5: Provided Accessories

    PROVIDED ACCESSORIES •AC Power Adapter/Charger • Remote Control Unit • DC Cord AA-V40U RM-V716U •Battery Pack • Jack Box •Shoulder Strap BN-V408U CU-V504U •Lens Hood ( pg. 7 • AAA (R03) Battery x 2 •MultiMediaCard (16 MB) for attachment) (for remote control unit) (Already inserted in the camcorder) •...
  • Page 6: Automatic Demonstration

    How To Attach The Lens Hood The provided lens hood helps block out glare when shooting under bright sunlight. Attach the lens hood to the ring and push the latch in the direction of the arrow to fix. Pull out the lid while pressing the latches in to remove.
  • Page 7: Getting Started

    GETTING STARTED Power Battery pack BN-V408U, This camcorder’s 2-way power supply system lets you BN-V416U or choose the most appropriate sour ce of power. Do not use To AC outlet BN-V428U provided power supply units with other equipment. CHARGING THE BATTERY PACK AC Power Make sure you unplug the camcorder ’s DC cord from Adapter/...
  • Page 8: Using Ac Power

    USING THE BATTERY PACK With the arrow on the battery pack pointing upward, push the battery pack slightly against the battery pack mount Slide up the battery pack until it locks in place •If the battery pack is attached with its mark set in the wrong direction, a malfunction may occur .
  • Page 9: Viewfinder Adjustment

    GETTING STARTED (cont.) Grip Adjustment Power Zoom Lever Separate the Velcro strip. Recording Start/Stop button Pass your right hand through the loop and grasp the grip. Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Lever.
  • Page 10: Date/Time Settings

    Date/Time Settings Power Switch The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback Power Lamp pg. 41). Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, and open the LCD monitor fully or pull out the viewfinder fully .
  • Page 11: Loading/Unloading A Cassette

    GETTING STARTED (cont.) Loading/Unloading A Cassette Erase protection tab* The camcorder needs to be powered up to load or eject a cassette. Make sure the Slide and hold OPEN/EJECT in the direction of the window side is arrow then pull the cassette holder cover open until it facing out.
  • Page 12: Loading A Memory Card

    Loading A Memory Card Card Cover The provided MultiMediaCard is already inserted in the camcorder when you receive the camcorder. Make sure the camcorder ’s power is off. Open the card cover (MEMORY CARD). Insert the memory card clipped edge first. •Do not touch the terminal on the reverse side of the label.
  • Page 13: Operation Mode

    GETTING STARTED (cont.) Operation Mode To turn on the camcorder, first set the Power Switch to any operation mode except “OFF” Choose the appropriate operation mode according to your while pressing down the Lock Button located preference using the Power Switch and Shooting Mode on the switch, then pull out the viewfinder Switch.
  • Page 14: Recording Mode Setting

    Recording Mode Setting Power Switch Set the tape recording mode depending on your preference. Power Lamp Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, and open the LCD monitor fully or pull out the viewfinder fully . The power lamp lights and the camcorder is turned Press the MENU wheel.
  • Page 15: Picture Mode Setting

    GETTING STARTED (cont.) Picture Mode Setting Power Switch The Picture mode can be selected to best match your needs. Power Lamp Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, and open the LCD monitor fully or pull out the viewfinder fully .
  • Page 16: Storage Capacity

    STORAGE CAPACITY The number of storable images depends on the selected picture quality and size as well as the composition of the subjects in the images. Approximate number of storable images (Provided 16 MB MultiMediaCard) QUALITY SIZE FINE STANDARD UXGA (1600 x 1200) XGA (1024 x 768) VGA (640 x 480) Approximate number of storable images...
  • Page 17 RECORDING Basic Recording For Video NOTE: Power Switch Shooting You should already have performed the procedures listed Mode Switch below. If not, do so before continuing. Power ( pg. 8) Power lamp Grip Adjustment ( pg. 10) Viewfinder Adjustment ( pg.
  • Page 18: Journalistic Shooting

    NOTES: When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this happens, use the viewfinder instead. The image will not appear simultaneously in the LCD monitor and the viewfinder except during Interface Shooting.
  • Page 19 RECORDING Basic Recording For Video (cont.) Snapshot (For Video Recording) Power Switch Shooting Mode Switch This feature lets you record still images that look like photographs onto a tape. SNAPSHOT SNAPSHOT MODE SELECTION Button Set the Shooting Mode Switch to “VIDEO”, then set the Power Switch to “...
  • Page 20: Basic Recording For Digital Still Camera (D.s.c.)

    RECORDING Basic Recording For Digital Still Camera (D.S.C.) Basic Shooting (Snapshot) Power Switch Shooting Mode Switch You can use your camcorder as a Digital Still Camera for taking snapshots. SNAPSHOT Button NOTE: You should already have performed the procedures listed below.
  • Page 21 RECORDING Basic Recording For Video And D.S.C. Zoom in (T: Telephoto) Zooming FEATURE: PURPOSE: 1 x W 10 x W To produce the zoom in/out effect, or an instantaneous 20 x W 40 x W change in image magnification. OPERATION: Zoom In Slide the Power Zoom Lever towards “T”.
  • Page 22 NOTE: Recording From The Middle Of A Tape Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame).
  • Page 23 RECORDING Advanced Features For Video And D.S.C. Progressive Mode Recording Power Switch Shooting Mode Switch This mode lets you record moving images (successive jitter-free still images) onto a tape. Images can then played SNAPSHOT back jitter-free, with superior quality. High-resolution still Button images can also be processed on a personal computer or can be printed out (...
  • Page 24 Description of Progressive Scan CCD Progressive Scan is a special image sensing method which, unlike conventional interlace scanning, is able to pick up all the lines of picture information in one Scan. Since the Progressive Scan CCD is capable of outputting 60 full Frames* per second —...
  • Page 25 RECORDING Advanced Features For Video And D.S.C. (cont.) Dual Shooting Power Switch Shooting Mode Switch Lets you record images on a tape and store still images in a memory card simultaneously. In other words, it is possible SNAPSHOT to store still images in the memory card without Button interrupting image recording on the tape.
  • Page 26 Focus detection zone While focusing on a further While focusing on a nearer subject subject Auto Focus FEATURE: PURPOSE: The camcorder ’s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm (2") to the subject) to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): •...
  • Page 27: Using Menus For Detailed Adjustment

    RECORDING Advanced Features For Video And D.S.C. (cont.) Using Menus For Detailed Adjustment Power Switch This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings ( pg. 29 – 31) . Set the Power Switch to “...
  • Page 28 Menu Screen Explanations Refer to “Fade/Wipe Effects” ( pg. 34, 35). FADER/WIPE Refer to “Program AE With Special Effects” ( pg. 36, 37). PROGRAM AE Refer to “White Balance Adjustment” and “Manual White Balance W.BALANCE Operation” ( pg. 39). Allows you to set the video recording mode (SP or LP) depending on your REC MODE preference ( pg.
  • Page 29 RECORDING Advanced Features For Video And D.S.C. (cont.) Menu Screen Explanations (cont.) Refer to “5-Second Recording” ( pg. 33). Allows you to record a few frames only. By using an inanimate object and ANIM. changing its position between shots, you can record the subject as though it is moving ( pg.
  • Page 30 Automatic demonstration will not take place. DEMO MODE Demonstrates certain functions such as Program AE with special effects, etc., and can be used to confirm how these functions operate. When “DEMO MODE” is set to “ON” and the Menu Screen is closed, demonstration starts. Performing any operation during the demonstration stops the demonstration temporarily.
  • Page 31 RECORDING Advanced Features For Video And D.S.C. (cont.) Self-Timer Power Switch Shooting Mode Switch Once the camcorder is set, the camcorder operator can become part of the scene in a more natural way , adding SNAPSHOT the final touch to a memorable picture. Button Set the Power Switch to “...
  • Page 32 5-Second Recording Power Switch Shooting Mode Switch Record a vacation or an important event in 5-second clips to keep the action moving. This function is available only SNAPSHOT for video recording. Button Set the Shooting Mode Switch to “VIDEO”, then set the Power Switch to “...
  • Page 33 RECORDING Advanced Features For Video And D.S.C. (cont.) Fade/Wipe Effects FADE/WIPE SELECTION These effects let you make pro-style scene Fade or Wipe works when video recording is started or transitions. Use them to spice up the transition when you stop recording. from one scene to the next.
  • Page 34 Fader And Wipe Menu Menu Effect Fade in or out with a white screen. FADER — WHITE Fade in or out with a black screen. FADER — BLACK Fade in to a color screen from a black and white screen, or fade out FADER —...

Table of Contents