Recording With Serial Remote Terminals - JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual

RECORDING

Recording with SERIAL REMOTE terminals

Recording can be turned ON/OFF with a serial remote controller or foot switch connected to the serial
remote terminal located at the rear panel of BR-HD50.
Connection
The serial remote controller can be connected to the SERIAL
REMOTE terminal located on the rear panel of BR-HD50.
Setting
To use the SERIAL REMOTE terminal, set REMOTE
SEL SER in the REMOTE [1/2] Menu screen to ON or
LOC+REM. Then, set the REMOTE/LOCAL switch on
the front panel accordingly.
REMOTE SEL SER
ON : When the REMOTE/LOCAL switch is set to
REMOTE, operations can be performed via the
SERIAL REMOTE terminal.
LOC+REM : With the REMOTE/LOCAL switch is set either way,
operations can be performed via the SERIAL
REMOTE terminal. With this setting, the buttons
and switches of the unit can be used too.
Set FOOT SW in the REMOTE [2/2] Menu screen accord-
ing to how the SERIAL REMOTE terminal is used.
OFF : Set to OFF when the serial remote controller is
used. The footswitch cannot be used.
L EDGE : Recording and recording pause is switched at the
LOW edge of the footswitch signal.
H EDGE : Recording and recording pause is switched at the
HIGH edge of the footswitch signal.
L LEVEL : Recording is performed at the LOW edge and
paused at the HIGH edge of the footswitch signal.
Operation
Before using the foot switch, set BR-HD50 to the RECORDING or
RECORDING PAUSE mode using the relevant buttons of the unit.
(Only with L EDGE and H EDGE)
Memo
The foot switch can only be used to switch between RECORD-
ING ON and OFF.
The foot switch can be operated regardless of the setting of the
REMOTE/LOCAL switch.
E-48
REMOTE/LOCAL switch
• Serial remote controller
• Foot switch
SERIAL
REMOTE
REMOTE [1/2] Menu screen
– – – R E MO T E [ 1 / 2 ] – – –
R E MO T E S E L 9 P
R E MO T E S E L S E R
R E M S E L H D V / D V
L O C A L F U N C T I O N
P R E R O L L
N E X T P A G E
P A G E B A C K
Memo
Besides recording, the serial
remote controller can per-
form other functions.
If the REMOTE SEL SER is set
to ON, unit buttons that can be
operated can be selected from
LOCAL FUNCTION in the
REMOTE [1/2] Menu screen.
REMOTE [2/2] Menu screen
– – – R E M O T E [ 2 / 2 ]
R E M F F / R E W M O D E
R E M S T O P S E L .
P B S T A R T D E L A Y
S Y N C H R O N I Z A T I O N
C O N T R O L L E R S E L
F O O T S W
P A G E B A C K
Foot switch
Serial IN
terminal
O N
O N
O N
S T P + E J T
7 S E C
– – –
F F / R E W
E E
0 F
O N
T Y P E 1
L E D G E
Signal
H
L
400ms
Min