Troubleshooting - JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual

OTHERS

Troubleshooting

Symptom
No power.
Unable to record.
The operation buttons of BR-HD50
do not work.
Editing cannot be controlled even
after the REMOTE/LOCAL switch
is set to REMOTE.
Noise is produced on the playback
video.
Playback sound interrupted.
Cannot play back.
Time codes are not correctly
recorded during DV signal input.
Unable to turn on the power with
the OPERATE button.
SERIAL REMOTE control does not
function.
Unable to operate BR-HD50 with
the IEEE1394 terminal.
Is the AC adapter correctly connected?
Is the slide of the cassette tape turned to "REC"?
Set it to "REC" if it is at the "SAVE" position.
Is OPERATION LOCK of the SYSTEM [2/2] Menu set to ON?
Set it to OFF if the operation buttons are to be used.
For REMOTE, select the buttons that can be operated with the
LOCAL FUNCTION Menu.
To control with RS-422A, set REMOTE SEL 9P in the REMOTE
[1/2] Menu screen to "ON".
• The tape is damaged.
Replace the tape.
• The head is dirty.
Clean it with the specified head-cleaning tape. (XPage 9)
Is the setting for PB TAPE FORMAT in the SYSTEM [2/2] Menu
screen something other than AUTO?
Playback is not available when this menu item does not match
the tape format.
Is TC DUPLI. in the TC/UB/CLOCK [1/2] Menu screen correctly
set up?
Isn't the REMOTE/LOCAL switch set to REMOTE when
LOCAL FUNCTION in the REMOTE [1/2] Menu screen is not
set to ALL KEYS?
Isn't REMOTE SEL SER in the REMOTE [1/2] Menu screen set
to OFF?
For SERIAL REMOTE control, set it to ON or LOC+REM.
• Isn't REM SEL HDV/DV in the REMOTE [1/2] Menu screen
set to OFF? To operate with the IEEE1394 terminal, set it to
ON or LOC+REM.
• When the controlling equipment (non-linear editor, etc.) does
not recognize this unit, either reconnect the IEEE1394
cable, or reset the power to the unit.
Action
E-81