When Connecting With A Rear View Camera; When Connecting With A Multi-Channel Processor - Pioneer AVH-P6000DVD Installation Manual

Connecting the Units

When connecting with a rear view camera

When this product is used with a rear view camera, it is possible to automatically switch
from the video to rear view image when the gear shift is moved to REVERSE (R).
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
• The screen image may appear reversed.
• The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight
parking spot. Do not use this function for entertainment purposes.
• The object in rear view may appear closer or more distant than in reality.
CAUTION
You must use a camera
which outputs mirror
reversed images.
This product
Back up camera input
(BACK UP CAMERA IN)
Rear view camera
20 cm
To video output
RCA cable
(7-7/8 in.)
(sold separately)
15 cm (5-7/8 in.)
Violet/white
Fuse resistor
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
Connection method
1. Clamp the lead. 2. Clamp firmly with
needle-nosed
pliers.
Note:
• It is necessary to set B.CAMERA to ON in SETUP
when connecting the rear view camera.

When connecting with a multi-channel processor

Not used.
43 cm (1 ft. 5 in.)
16 cm
IP-BUS input
(6-1/4 in.)
(Blue)
Blue
IP-BUS cable
(supplied with
This product
multi-channel processor)
Subwoofer output or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
23 cm
RCA cable (supplied with
(9 in.)
multi-channel processor)
Optical cable (supplied with
multi-channel processor)
Optical cable
Blue
(sold separately)
Multi-channel processor
(DEQ-P8000)
(sold separately)
Black Blue
IP-BUS cable
When you connect External unit with
optical output (sold separately) to the
multi-channel processor (sold
separately), the optical cable from the
External unit must be connected to the
optical cable 2 input (OPT. IN2) on the
multi-channel processor.
Fig. 4
When connecting with Vehicle Dynamics Processor and iPod adapter
28 cm (11 in.)
This product
16 cm
Video 1 input
(6-1/4 in.)
(VIDEO 1 INPUT)
26 pin cable
(supplied with Vehicle
IP-BUS input (Blue)
Dynamics Processor)
1.5 m (4 ft. 11 in.)
IP-BUS cable
(Supplied with
the iPod adapter)
RCA cable
(sold separately)
iPod with dock connector
To video output
Dock connector port
External unit
with optical output
(sold separately) Dock connector
(Supplied with the iPod adapter)
IP-BUS
Blue
output
(Black)
Multi-CD Player
(sold separately)
Fig. 5
When connecting with Vehicle Dynamics Processor and Bluetooth adapter
26 pin cable input
Yellow
Vehicle Dynamics Processor
(e.g. AVG-VDP1)
(sold separately)
IP-BUS cable Microphone
for hands-free phoning
(supplied with the Bluetooth adapter)
Black
Blue
iPod adapter
(e.g. CD-IB100 —)
Multi-CD player
(sold separately)
1.5 m (4 ft. 11 in.)
Fig. 6
<ENGLISH>
26 pin cable input
Yellow
This product Vehicle Dynamics Processor
16 cm
(e.g. AVG-VDP1)
(6-1/4 in.)
(sold separately)
26 pin cable
(supplied with Vehicle
IP-BUS input (Blue)
Dynamics Processor)
1.5 m (4 ft. 11 in.)
Blue
Bluetooth adapter
(e.g. CD-BTB200)
Blue Black
IP-BUS cable
Black
(Supplied with the Bluetooth adapter)
Multi-CD player
(sold separately)
Fig. 7